My DIY Button Box

Psydfx

25RPM
Joined
May 26, 2013
Messages
42
When Derek announced his new 64 input board , myself and Phillp Berry concocted an evil plan to build the mother of all button boxes ...

30 illuminated push button switches & 10 rotary encoders !

With Derek donating us a board each ( BIG thanks to you Derek ), we set about what and how we were going to build it . Once completely built i will post a list that will allow other DIYers to perhaps build their own monster box !!

So here we go .......


FFF2FB6F-7E7E-4346-9518-B32EFD664375_zpsdt2bcgpc.jpg


A019AC46-ACEC-4BD6-85E1-9E94E0409A57_zps2mfrnazw.png


91006E96-138A-4389-BB07-4D7B6C1F9272_zps6348dc66.jpg


271EB2AC-7D13-4C15-BD05-DBDE9E1B0B27_zpstf72x0hl.jpg


Button boxes .... With dimmer switch installed


photo25_zps70e509ba.jpg




Meanwhile , Phil away on work has turned his motel room into a mobile electronics lab .... the end result is finished button box ......


photo32_zpsab5d50c7.jpg


photo24_zpsbf8ff37b.jpg


photo15_zps309626a9.jpg
 

Jeff Huber

250RPM
Joined
Sep 24, 2013
Messages
432
WOW! I was doing some research on button boxes and came across this thread. That box is incredible looking! I'm surprised we didn't get more replies on this. I'm looking at a big button box like this myself , instead of having two smaller ones. Awesome job on this one , and looks badass!
 
Top