Help with Err: Track 'repeat' must have at least 2 timelines

sammm · Jan 17, 2010

Hi guys,

I am building a small figure of 8 track using BTB, and trying to export it into racer. However the track will not load with the following error:

"Track 'repeat' must have at least 2 timelines"

I'm not sure what this error means, and trying a quick google didnt turn up anything helpful.

I made a track before importing from google earth and that went fine, so I can only assume I have some settings wrong in the track setup.

The full error code from the QLOG in racer is:

Sun Jan 17 15:46:33 (INFO): [noqapp/3692] --- application start ---
Sun Jan 17 15:46:33 (INFO): [noqapp/3692] 4 processor(s); setting affinity to 0x1
Sun Jan 17 15:46:33 (INFO): [racer/3692] Racer version: 0.8.6 (Nov 6 2009/11:36:14) - customer: Internet
Sun Jan 17 15:46:34 (INFO): [racer/3692] Physics engine: NEWTON
Sun Jan 17 15:46:34 (INFO): [racer/3692] Audio: setting speakermode to 2 (stereo, system default is stereo)
Sun Jan 17 15:46:39 (INFO): [racer/3692] Loading track 'BobsTrackBuilder'
Sun Jan 17 15:46:39 (WARN): [racer/3692] QInfo: 'data/tracks/BobsTrackBuilder/special.ini' nests too deep (max 312153328 levels)
Sun Jan 17 15:46:39 (INFO): [racer/3692] --- application start ---
Sun Jan 17 15:46:39 (WARN): [racer/3692] QInfo: 'data/tracks/BobsTrackBuilder/special.ini' nests too deep (max 312153328 levels)
Sun Jan 17 15:46:39 (WARN): [racer/3692] QInfo: 'data/tracks/BobsTrackBuilder/special.ini' nests too deep (max 312153328 levels)
Sun Jan 17 15:46:39 (WARN): [racer/3692] QInfo: 'data/tracks/BobsTrackBuilder/special.ini' nests too deep (max 312153328 levels)
Sun Jan 17 15:46:39 (WARN): [racer/3692] QInfo(data/tracks/BobsTrackBuilder/special.ini): reference (~) to unknown tree 'tcam_common' in line 486
Sun Jan 17 15:46:39 (ERR ): [racer/3692] QInfo(data/tracks/BobsTrackBuilder/special.ini); brackets don't match; still 6 closing bracket(s) expected at end of file.
Sun Jan 17 15:46:39 (WARN): [racer/3692] QInfo: can't open 'data/tracks/BobsTrackBuilder/spline.ini'
Sun Jan 17 15:46:39 (WARN): [racer/3692] No splines found for track 'BobsTrackBuilder', has impact on AI/minimap etc.
Sun Jan 17 15:46:39 (WARN): [racer/3692] No surfaces found that match pattern 'rgeddirt*'
Sun Jan 17 15:46:39 (WARN): [racer/3692] No surfaces found that match pattern 'gras*'
Sun Jan 17 15:46:39 (WARN): [racer/3692] No surfaces found that match pattern 'rgedgrav*'
Sun Jan 17 15:46:39 (WARN): [racer/3692] No surfaces found that match pattern 'rmbl*'
Sun Jan 17 15:46:39 (WARN): [racer/3692] No splines found; minimap is disabled.
Sun Jan 17 15:46:39 (ERR ): [racer/3692] Track 'repeat' must have at least 2 timelines
Sun Jan 17 15:46:41 (WARN): [racer/3692] QObjMgr: object 'data/images/loading.jpg' still around with 1 reference(s)

I fixed the bracket error, however the problem still continued.

If anyone can help me out with this problem it would be awesome, its for a project due in for a few days time and I typically left it to the last minute!

Incase anyone wants to look at the track itself I uploaded it to my webspace. Note that its not meant to look good, just needs the basic track layout and to run in Racer.

www.barnzey.co.uk/Fig8new.zip

Thanks
Sam