First attempt at sketchup design for aluminium rig

I've just started to design a rig from aluminium profile
Thinner members are 40x40mm, larger is 80x40mm

Working on better pedal plate structure and triple monitor mount

Any feedback welcome
aa72893e81dd2c0a416be0b7c1f55fe3.png


ffb4a1146ae82e4c31860d9158b687f0.png

4cc650c322a7cebe736b5278d9da4513.png
 
Alu rigs are takong off ;)

Looking good indeed. One thing to be mindful of is how you connect you profiles. Check the brackets you want to use, some have short portruding edges which slot into the rail of the connecting profile. A rule of thumb is making sure the rails in the profiles are continous. I d-ont know if this apply to every size or brand, but this was an issue with motedis 45x45 material.
 
Upvote 0

Latest News

Online or Offline racing?

  • 100% online racing

    Votes: 70 7.3%
  • 75% online 25% offline

    Votes: 99 10.4%
  • 50% online 50% offline

    Votes: 139 14.5%
  • 25% online 75% offline

    Votes: 265 27.7%
  • 100% offline racing

    Votes: 379 39.6%
  • Something else, explain in comment

    Votes: 4 0.4%
Back
Top