Wanted Fanatec Uni Hub

[Deleted member 6919]

Looking for a Fanatec Uni Hub, for the PC..

 

[Deleted member 6919]

No one...

 

[JohnnyV]

I have one which I dont use anymore, but its been converted to USB and q1r.
You're probably looking for one for your fanatec base ?

 

[Deleted member 6919]

Yeh I am, but cheers for the reply..

 

[Deleted member 6919]

Did you use a kit for the conversion? would it be easy to reverse?

 

[JohnnyV]

I did it myself with an arduino.
But I’ve sold the fanatic quick release so not reversible

 

[Deleted member 6919]

Ok no worries..

 

[EsxPaul]

Mark, if you go any further with this and need a quick release to make things complete,let me know.

I converted my McLaren rim to usb so have one being unused at the moment.

 

[Deleted member 6919]

Paul, umm problem have no idea what is involved in the reverse process, maybe Johnny can help out there..

 

[EsxPaul]

Paul, umm problem have no idea what is involved in the reverse process, maybe Johnny can help out there..

I see what you mean. Perhaps need to have all the parts laid out so you know you'll be able to make it factory spec once more.

Here's what I have:

The wiring loom/multiplug is from the McLaren rim. Not sure if that particular part is common across all Fanatec stuff or is specific to each different wheel? Might need a Fanatec guru to chip in.

I'm in no rush to part with it but just wanted to let you know its there if you come to need it in the future

 

[JohnnyV]

@EsxPaul Thank you for this pic.
I just checked and I can use the wiring loom for the universal hub.
But what is the spacing of the 6 holes of the QR?
The universal hub has something like 52 mm from one hole to the hole on the opposite side, yours looks larger.

If it is larger perhaps I can 3d print and adapter.
@Gopher04 Just so you know if you want to go through with this:
My universal hub comes with the original packaging and all buttonpods/encoders/flappy paddles etc
The 7 segment displays works, but i have damaged the daughter board a little bit and as such some buttons dont work on the top side (the Playstation buttons).
But all the 'wheel' buttons encoders shifters etc DO work.
As such I wont ask full 2nd hand value for the hub if you do decide to buy it.

Just trying to help you since I dont use it anymore.

 

[Deleted member 6919]

Appreciate the help guys but I'll leave it for now..

 

[EsxPaul]

@EsxPaul Thank you for this pic.
I just checked and I can use the wiring loom for the universal hub.
But what is the spacing of the 6 holes of the QR?
The universal hub has something like 52 mm from one hole to the hole on the opposite side, yours looks larger.

I've just checked the spacing on the holes and they are the standard 70mm spacing from centre to centre on opposite holes so you are correct.

I guess the supplied qr for the uni hub is different to the ones that come with the rims?

 

[EsxPaul]

Appreciate the help guys but I'll leave it for now..

Understand, mate. Could be a right ballache when compared to having a complete unit.

 

[DrewRosenHouse]

@EsxPaul Thank you for this pic.
I just checked and I can use the wiring loom for the universal hub.
But what is the spacing of the 6 holes of the QR?
The universal hub has something like 52 mm from one hole to the hole on the opposite side, yours looks larger.

If it is larger perhaps I can 3d print and adapter.
@Gopher04 Just so you know if you want to go through with this:
My universal hub comes with the original packaging and all buttonpods/encoders/flappy paddles etc
The 7 segment displays works, but i have damaged the daughter board a little bit and as such some buttons dont work on the top side (the Playstation buttons).
But all the 'wheel' buttons encoders shifters etc DO work.
As such I wont ask full 2nd hand value for the hub if you do decide to buy it.

Just trying to help you since I dont use it anymore.

I will buy the converted hub if the OP doesn't want it. I messaged you.

 

[Deleted member 6919]

I still looking for a Uni hub just to keep this thread upto date..

 

[figplus]

I have one available with a gt rim

 

[Deleted member 6919]

I have one available with a gt rim

Cool, pics and a price would be good bud..

 

[figplus]

Asking $300 + shipping. I have box for the hub and reciepts for both.

 

[Deleted member 6919]

I'm guessing your in the US, if so I'll leave it..but cheers anyway.