Brake and Throttle problem in rFactor

Discussion in 'Formula SimRacing' started by jetplaner, Sep 25, 2012.

  1. jetplaner

    jetplaner

    Messages:
    177
    Ratings:
    +59
    I have a Logitech G27 Wheel and when l barrely push the throttle or brake the meter goes to full. Any suggections?
     
  2. David Dominguez

    David Dominguez
    Premium

    Messages:
    2,615
    Ratings:
    +1,638
    If this is a problem only with rFactor you should have opened this thread on the rFactor forum :)

    Anyway, make sure you have not messed something on the pedal sensitivities, first of all.
     
  3. Morgan Morand

    Morgan Morand

    Messages:
    316
    Ratings:
    +461
    It's normal if you activate the logitech G27 and you don't push the throttle or brake to full,
    If you pushed only at 20% the brake, the software will think that you are at 100% if you push at 20% again.
    Or if you have done that and the problem is still there, check the pedal sensitivities like David said
     
  4. jetplaner

    jetplaner

    Messages:
    177
    Ratings:
    +59
    I've calibrated and it works.