steering wheel

  1. Emery

    Recommend a steering wheel wrap?

    My Fanatec BMW rim's alcantara has a few wear holes and the stitching is beginning to fall apart. Can anyone recommend a wrap or similar treatment to replace the alcantara?
  2. X

    Making my own formula steering wheel.

    Hello everyone, So recently, since I have a lot of free time I got an idea to make a formula steering wheel for my g29. The problem occurs when it comes to wiring all the buttons and encoders. At the begining I wanted to use one of Arduino boards since they are quite cheap. But when I did some...
    • xekill
    • Thread
    • arduino bbi-32 diy encoders leo bodnar steering wheel steering wheel f1 diy
    • Replies: 3
    • Forum: Sim Racing Hardware
  3. M

    Sell All of my Fanatec Gear ($1499.99 plus shipping for the whole bundle...)

    I have way too much Fanatec gear sitting in my storage room and some of it is quite nice... all xBox, where applicable... the prices below include shipping and handling. If you want more than one, but not all, I will do something to save you money depending on which ones and how many you buy...
    • McNickle
    • Thread
    • clubsport clubsport sq csl elite fanatec fanatec clubsport v2.5 fanatec v3 inverted steering wheel xbox one
    • Replies: 13
    • Forum: Sim Racing Marketplace
  4. M

    Sell Leo Bodnar SimSteering2 FFB System (54) - Ultimate

    I figured I would start off with my most prized Sim Racing component. Honestly, I am only selling this if someone makes me an offer that I can’t refuse (no killing of horses is allowed... I’m from Kentucky people... horses are important to us). If they do, I will include the mounting bracket...
  5. T

    3D Printed Low Mass 320mm Steering Wheel

    Just uploaded the file to thingiverse: https://www.thingiverse.com/thing:4405915 Feel free to test it out! It's lighter (400g without the hub) than any formula wheels and rigid enough for daily use.
  6. L

    Combine keyboard commands in ACC for DIY steering wheel

    Hi, I have a Logitech g29 with a DIY steering wheel, is it possible on "Assetto Corsa Competizione" to combine keyboard commands (for the DIY steering wheel) using at the same time pedals and motor of the Logitech?
  7. Mr.Matrix

    Katana Steering Wheel v1.0

    This mod is an ancient japanese sword styled (Katana) steering wheel. It was modelled after the real life counterpart. It features a variety of Tsuba's (katana's handle) colors as well as the photoshop preset with all of the layers, so that you can customise the color or patterns on your own...
    • Mr.Matrix
    • Resource
    • deep dish deepdish katana steering steering wheel style sword tsuba tsuka wheel
    • Category: AC Misc
  8. I

    Sell Ascher Racing B16M-USB

    SOLD I have new in the box B16M-USB for sale. Never installed. Includes the original packaging and decals. Shipped to Continental US for $425. Pictures available here: https://www.icloud.com/sharedalbum/#B0LJqstnBG8IReo
  9. 3

    Windows doesn't detect axes (Thrustmaster Ferrari GT 2-in-1 Rumble Force)

    Windows 10 PC doesn't detect neither X, Y or RZ axes (No steering, accelerator or brake), no matter which version of FFB (from 2006 to 2018) drivers is installed. Is there a possible solution assuming it's not a hardware issue, which I hope it's not.
  10. daro1215

    Logitech g29 pedals cable problem

    Hello everyone! Yesterday I found out that something is wrong with my g29 pedals. If I move a cable that comes from pedals sometimes happens that logitech profiler or just games detects like the gas/clutch/brake pedals are pressed, although it actually is not pressed. But sometimes when I move a...
  11. mothabrain

    DiRT Rally 2.0 steering 1:1 transmission

    hey guys, perhaps someone knows how to set this one straight. i own a tm500rs and use it with 1080° steering on default. since ac or other racing games are able to pick up the right degree of steering i wonder why it doesn't work for dr2. for instance if u steer right for 90 degrees to the...
    • mothabrain
    • Thread
    • dirt 2 dirt 2.0 steering steering wheel t500 rs thrustmaster
    • Replies: 6
    • Forum: DiRT Series
  12. NekoIron

    New SteeringW Momo 2019-08-13

    Texture installation must be done by UnityAssetsExplorer program
  13. V

    Sell SimuCUBE 1 & Steering Wheel SRC GT-1

    Hi, I'm selling my SimuCUBE1 because set has been useless for me a long time now because my healthy issues and now I have purchased Fanatec DD Podium. SimuCUBE based OSW kit SinCos - with CM110 case ServoMotor: MiGE 130ST-M10010 SinCos - 2,1 mil cpr PSU: Mean Well 480W (Noiseless) 20-30Nm Servo...
  14. BloodySalmonMan

    Sell LMP3/F4 steering wheels

    Hi! This is Taichi from Taichi Sim Racing Wheels! Here, I'm happy to announce a new LMP3 style wheel! There is quite a few options for this wheel. The price starting at 524USD and the highend model is available at 1060USD. Go on to my website to get yours, or contact me if you want to customise...
  15. BloodySalmonMan

    2019 Alfa Romeo F1 Steering Wheel

    Hi guys. As some people requested, I decided to design 2019 Alffa Romeo F1 wheel. Here is the render of the wheel. In case you're interested, please contact me for further details. Price Complete wheel: €1040 Data for DIY: €35 (Will upload on Pinshape soon) website...
  16. BloodySalmonMan

    DIY AMG GT3 steering wheel

    Hey guys. I've designed and built AMG GT3 style wheel this time. The logo on the centre is Alfa Romeo but it was requested by the customer, and yeah, it worked pretty nicely I should say. So, as per usual, here are some pics of the wheel! If you're thinking about buying one, feel free to DM me...
  17. BloodySalmonMan

    DIY Cosworth steering wheel (LMP3/F4)

    Hi guys. I've been racing in VEC for SpeedyMite Racing this year and though it'd be good to have a replica wheel of the car I was racing in. So I gave it a try. The machine was Norma LMP3 and it uses Cosworth CFW277 steering wheel. I've designed it on CAD then laser cut Aluminium plates and 3D...
  18. Andre Dietzel

    Sell Simracingbay OSW Direct-Drive Wheel 20 Nm Mige

    I am selling my OSW Direct Drive Wheel by Simracingbay in Tomo Meglic‘s known great built quality. It gave me endless hours of fantastic sim racing. Full spec Granite IONI Cube system with 20 Nm Mige Motor and the upgraded 10000ppr sensor. IONI ProHC Controller and 720W power supply. Was used...
  19. Cthulhus

    RSS Formula Hybrid 2019 - Team logo on the steering wheel 2019-04-05

    This small mod add team logo on the steering wheel for the RSS Formula Hybrid 2019. It will replace the Precision Sim Engineering logo with the corresponding team logo. • Alfa Romeo • Renault F1 Team • Ferrari • Mercedes • Racing Point • McLaren • Williams • Torro-Rosso • Redbull • Haas To...
    • Cthulhus
    • Resource
    • rss formula hybrid 2019 steering wheel
    • Category: AC Skins
  20. BloodySalmonMan

    DIY Corvette C7.R GTE style steering wheel (Complete)

    Hi guys. After building Coswroth MK2 (LMP2) steering wheel, I received an order to make Corvette C7.R GTE style steering wheel. And I want to share my work before sending it all the way to Australia. As per usual, here are some pictures of the completed wheel rim. The rim consists of two main...

Latest News

Are you buying setups?

  • Yes

  • No

Results are only viewable after voting.
See comments…
Back
Top