brake

  1. G-Slev

    Brake Calibration Question

    Could anyone give me some advice on calibrating the brake on my clubsport v3s? I was previously setting the minimum for all three pedals, then pushing the brake as hard as a could and setting the max. However, some kind folk here pointed out when I was posting a hotlap video that I wasn't...
  2. X

    XIV - Overdrive and brakes 1.0

    What is it ? It's a simhub overlay that display the break pedal gauge but highlight it if the front tyres are saturated and are sliding. It's usefull to determine if you are turning and breaking too much. How to install ? Double click on the .simhub file. Don't forget to add it to an...
  3. G4ndY

    SimHub overlay Bonanza! 1

    Fully modular overlays, everything can be moved and resized/placed where you like it. Import the .simhubdash files with SimHub and extract the imageLibrary folder into your SimHub install folder. If you want to tweak the redlinerpm lights open simhub and go to Car settings and change the...
  4. N

    Modded cars dont react to Braking

    So hey ..after figuring out how to fix the Grey windscreen bug i ran into a different problem while doing quality control of my 1700 cars the car: De Tomaso Pantera GT5-S made by "AC Cars Reworked (3.0)" So far all is fine but the car does not seem to react to braking at all even tho i can...
  5. G4ndY

    Essentials Advanced+ 1.2

    Added some more candy to the Essentials bar from AC. To much? Maybe....But i did it :p Added TC, ABS, Lights, Wipers icons that turns on when active and in use. Added flags, added track and ambient temps. The 4 LEDS around the speedcounter flashes yellow when pitspeed is active...Badly timed...
  6. G4ndY

    Essentials Advanced 1.1

    The "Classic" Essentials from AC with added options. 3xDash huds with 1 being tyre/brake info, 2 being timings including sector times and "Pole Lap", 3 is Standard with gap in front and behind. Unzip the folder on your desktop, double click the.Simhubdash file and this should import it into...
  7. S

    General Only one brake disc textured, rest textured partially

    Hi! I'm modding Supra for personal use. Everything went fine (my 1st mod so I'm proud) but I encountered a problem with texturing brake discs. So in AC/CM showroom everything is ok, but when I get this Supra on race there is only one brake disc textured (rear right). Rest of them aren't textured...
  8. andre

    Best LC brake pedal configuration

    Hi guys I haven't seen anything on this, so I hope this isn't a repost. I recently bought renovated my rig (desk pleb here) and I got a Fanatec CSL elite kit with the load cell brake pedal. It's the first time using LC so I'm on the beginning of a steep learning curve. At the moment I'm using...
  9. Ross McGregor

    Sell DSD Wilwood Pedals

    Hi, I'm looking to simplify my sim-racing setup so have decided to sell my DSD wilwood pedals. They have a load cell brake and would be a great addition to a dedicated sim rig, or for someone that is heavily into sim-racing and looking to shave off that last tenth! I've had mine for nearly 3...
  10. Techie Pocket

    what screws are used on the G27 pedal faces?

    Helolo! This is my first post here so let me know if there is anything I need to have done :) Recently I purchased a NIXIM mod for my brake. I tried removing the pedal faces but they were very very tightly screwed in(mine is refurbished). So short story I stripped the screws for the clutch and...
  11. Muzammelo

    Cars Brake Feels Underpowered

    Hello, last week i test my mod of Corvette Z06 C7, there is little issue, when i brake, the car not want to turn, even the steer is not locked, and even with abs on. The worst part is when AI steer the cars, ai can't turn, AI just brake and turn a little bit, then AI still braking and crashing...
  12. BeefyPeeg

    Measuring Load Cell Force

    I have the CSL Elite Load Cell, and have the shore 95 elastomer springs installed, which if I'm correct is about 200 lbs. of force. This may be a bit of a silly question, but in the interest of longevity, I'm curious how much force I am actually applying to the pedal under braking? I can't see...
  13. ltcars

    Cars Aero Settings

    Hello, I want to create different wing settings for a car. I have 4 aero settings with 4 different drag coefficients, one of them is an air brake
  14. S

    G27/G29 brake spring strength

    Just want to find out the spring strength/ technical specifications of the logitech pedals standard brake spring so I can order one of similar resistance to replace the T3PA's accelerator spring. In addition if anyone knows the spring strength of the GTEYE brake mod for the logitech pedals that...
  15. S

    T3PA brake pedal deadzone

    Just upgraded from a logitech G25 to the t300 alcantara edition with the T3PA pedals and one of the things I have noticed is the deadzone on the brake pedal. The thrustmaster software doesn't register any brake pedal movement until after I get on the conical brake mod. This is really bugging me...