• Welcome to the largest (sim) racing website in the world!
    Blurring the line between real and virtual motorsports.

DIY 3d Printed WRC Magnetic Push-Pull Paddle Shifter for Rallyesim

Leza Dreamizer
I desined for 320mm~330mm Steering Wheel.

Because it is designed to be tight for durability,
You need sandpaper.

When the magnet is installed to collide,
It improves control feelings.


3d files are available from the links below. ($ 3.89)
https://pinshape.com/items/52061-3d-printed-diy-wrc-magnetic-push-pull-paddle-shifter-for-rallyesim


Items Required:

Micro lever switch x2
125V 1A 3 Terminals Momentary 13mm Lever Arm Micro Switch Black KW10
https://www.ebay.com.au/itm/10Pcs-KW10-125V-1A-3-Terminals-Momentary-13mm-Lever-Arm-Micro-Switch-ATAU-/263255605574?oid=332165886657

Circular neodymium magnets x2
https://www.ebay.com.au/itm/N52-Super-Strong-Round-Cuboid-Rare-Earth-Cylinder-NdFeB-Neodymium-Magnet-1-3-5mm-/183150778763?oid=322503263625

M3 Cap socket screws
1x 35mm
1x 25mm
2x 12mm
4x 10mm

M3 Nut x8


Wrapping Wires
https://www.ebay.com.au/sch/i.html?_osacat=0&_odkw=arduino+pro+micro&_from=R40&_trksid=p2334524.m570.l1313.TR12.TRC2.A0.H0.Xwrapping+wire.TRS0&_nkw=wrapping+wire&_sacat=0


Zero Delay LED Arcade MAME Encoder USB To PC 5Pin Joystick PCB Board+Cables
https://www.ebay.com.au/sch/i.html?_osacat=0&_odkw=PC+IST+PCB&_from=R40&_trksid=m570.l1313&_nkw=joystick+PCB&_sacat=0

or you can use another many joystick pcb.

Instead of PCB, also use Arduino Pro Micro.
https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR4.TRC2.A0.H0.Xarduino+pro+micro.TRS0&_nkw=arduino+pro+micro&_sacat=0

https://www.arduino.cc/
https://www.zeroboy.eu/arduino-leonardo-pro-micro-atmega32u4-gamepad/?lang=en



If you use Thrustmaster T300 or T500,
use YipZone's Circular base
https://youtu.be/jus6ZKtbMic
https://www.thingiverse.com/thing:2844116


This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
https://creativecommons.org/licenses/by-nc-nd/4.0/

Separate names with a comma.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.