Version 13.2 is here.

Notable AMS2 changes.
  • Added Le Mans tracks
  • Added all cars up-to 1.5.5
  • Added SPA RX track trackmap
  • V1.4.9/V1.5. track and cars added (Barcelona Nat + Montreal 1991)
  • New Relay for the SharedMemory V14
  • Driving pane:
    • Added option to show Tyre setup hints (less/more camber, less/more pressure)
    • Added current stint OMI averages below the real-time values
    • Added Launch status to the sidebar
    • Added turboboost/boost values to the controls
    • Added options to select, which tyre data is visible
    • Added option to show tyre temp/pressure setup hints. You can adjust the treshold values via the sidebar sliders.
    • Added OMI Profile graph
    • Added Tyre temp target: This affects the temperature colors for tyres
    • Added tyre pressure at the start of the stint for each tyre the view is - X.xx Bar (Z.zz), so current pressure in Bar (pressure at start of stint)
  • Added class colors to most maps
  • Added 'Sort by Class' to the multi-car views
  • Added to Map view the legend for the car colors
  • Fixed random occurrence, when the fastest lap would not load
  • Fixed issue, where the first flying lap on P&Q was marked as pitlap.
  • Fixed issue, where very long timed race the Delta might not work on last laps
  • Adjusted the tool to make sure, it works with grids larger than 32 cars
  • Added DPad as option to change the tab in the tool
  • Added system to handle the Safety Car in the maps
Notable other changes.
  • ACC GT2 DLC updates + many ACC related fixes/tweaks
  • F1 23, fixes to some trackmaps + new Singapore trackmap
  • Added preliminary EA WRC support
  • Added OMI profile to AMS2/PC2+ also for AC, R3E and rF2
  • Added alerts to show an alert on UI, if some value, e.g. tyre pressure lower/higher than set "alert level".
  • Fuel use estimate improvements
  • UDP/TCP redirect fixes, also added new F1 23 redirect mode with Hz level settings, which makes it behave much better e.g. with SF1000.
  • Added class sort order to ACC/AMS2/PC2/R3E/rF2 views.
  • Multicar session history, now you can select, which columns are visible.
  • RaceInfo: Added gaps, which shows caps to the cars in the same class and to all cars.
  • Map: Altered bit the data shown
  • A lot of tweaks/fixes and optimizations.
For list of the changes, check the ReadMe.txt. There is almost 100 changes listed.

Updating from older versions: Just unzip .zip on top of your old installation.

Clean/New install. Unzip the files to anywhere in your system (e.g. under 'Program Files\Telemetry Tool' or to somewhere else). On the first run the Tool will ask location for data files. For install help, see https://telemetrytool.com/install

It is advisable to move to this version regardless if you are on pre v13 or on any v13 version. This version has lot of optimizations and fixes.

Enjoy, and get faster.
Version 13.1 is here

Notable changes
  • Many fixes to the multicar data system for F1 2018-F1 23, AC, ACC, AMS2, PC2, R3E and rF2. Now it is in state, it should have been at 13.0 release.
  • Many F1 23 related fixes and new data usages, where feasible.
  • Fixed issue, where it was not possible to load loaded laps from multilap telemetry into Statstistics Table. At the same time enabled opponent laps loading to multilap telemetry.
  • Fixes to the 'BLUE Line: Fastest Opponent' to make it work with all the multicar data games.
  • Added scrollbars to those windows, where the content might flow over
  • RaceInfo, add zoom and rotate to the map in the centerpane . The settings are also saved on per track basis.
  • Fixes to the laptime coloring and many places
  • General: Optimizations and fixes
If you are using version 13.0, it is very advisable to update to the new version.

For list of changes, see the ReadMe.txt in the .zip.

Updating from older versions: Just unzip .zip on top of your old installation. If you use PC2, make sure to update the relay.

Clean/New install. Unzip the files to anywhere in your system (e.g. under 'Program Files\Telemetry Tool' or to somewhere else). On the first run the Tool will ask location for data files, so no need to edit the baseSettings.xml file.

The new version has been tested quite a bit for F1 23/F1 22/ACC/AC/AMS2/R3E/rF2, but there might still be something odd lurking around. If you find anything odd, please let me know.

Enjoy, and get faster.
  • Like
Reactions: OLIVER JUNIOR
Hello,

V13 with F1 23 support is out. You can get the new version from
https://www.racedepartment.com/downloads/telemetry-tool-for-f1-23-and-many-other-games.61580/

Notable AMS2 related changes are:

  • Trackmaps for Barcelona + updated car data
  • New multi-car session history statistics shows many data, like laptimes averages (last 3, since pitstop, all valid laps etc), laps since pitstop etc. for all cars in the race
  • Fuel need estimate calculator, data is based on your laps completed on the selected car and stored by Telemetry Tool.
Notable new changes

  • Full F1 23 support
  • Changed lapdata and opponent file formats and added more data to the headers
  • Experimental TCP Forward support (to mitigate VPN related packet drop issues).
Normal install rules apply. Just unzip the whole packet on top of your existing installation.

Or you can do a clean install to a new directory. Then the Tool will ask for location of data files, so you can keep using your old data files.

Enjoy, and get faster.

Multi-car session history
V130_ACC_Multicar_session_history.png


Multi-car session history driver details
V130_ACC_Multicar_session_history_details.png
Version 12.4 is here.

Notable AMS2 changes/fixes:
  • New Nordschleife 1971 trackmaps
  • 1.4.7 cars and other additions
Other notable additions:
  • All relays have been updated
  • AC: new plugin to mitigate conflicts with other plugins
  • ACC: tyre wear data entry + many ACC related optimizations + 1.9 DLC updates, including Valencia trackmap
  • rF2: new plugin with new data, also new trackmaps added to the extra track map pack
  • R3E: new versions data added
  • Workspace: Load and save buttons added for easier management of the workspaces
  • BLUE LAP lap has new option: Previous lap
See the ReadMe.txt for list of additions
See the ReadMe.txt for the list of all additions/changes.

Update

To update, you can just unzip the whole .zip on top of your existing installation.

For simple update, just update the Telemetry.jar in the existing installation + the bin directory (new relays) and for AMS2, also unzip/copy the contents of tracks/ams2 to your Telemetry Tool install directory. There are new trackmaps + the updated track list.

New Install

If you are doing a new install, just unzip the package anywhere in your system (can be in \program files or e.g. \bin\telemetry_tool). On windows start the tool with runWin.bat and select the game mode. On first run the Tool will ask for the location of data files etc. and it will setup all things for you. The default settings should work well.

If you use the Tool on Linux/Mac, check the ReadMe.txt for details on running the Tool on those platforms.

Enjoy and get faster.

Cheers.
Version 12.3 is here.

It took much longer than expected to get this out.

Notable AMS2 changes/fixes:
  • Fixed race history saving. Now even if you do just one single race, the race history + timing data will be saved (if enabled from the settings)

  • Added 'Oil Pressure', 'Water pressure' and 'Fuel pressure' to the Driving tab view
  • Added Bathurst 1983 track. Also includes the trackmaps for the earlier 1.4.5 version, i.e. Jerez and Cascais 1988 tracks.
  • Added new car classes data
Key new additions on this release:
  • STATISTICS TABLE GRAPHS: Added session long view, where you can see key tyre data for all laps in the session. Very handy e.g. for ACC to setup the tyre pressures.
  • AC multi-player support, i.e. data is now collected from all cars in the race, when you install the plugin. Also a lot of changes/fixes relating to multi-car data and other data. This works only on the PC version.
  • MAP: Added forward pit window (or you can also select any car in the race to show, where they would land after normal pitstop).
  • RACE INFO: Fixed some issues with fuel use calculations. It should now work better also at the start of the race.
  • RACE TIMING: You can now select any driver and show their laptimes from the race.
  • COMPARISON PANEL: You can now adjust the width of the data visual line. Makes easier to work with that data.
  • Fixed race history saving. It should now work well in all games even, if you just do one race and quit the tool.
  • RaceRoom Racing Experience support added
  • rFactor 2, new plugin, which should put less stress on the network connection + plenty of fixes/tweaks
  • AMS2: Added the new tracks + cars data
  • A lot of little tweaks/fixes here and there.
See the ReadMe.txt for the list of all additions/changes.

Update

To update, you can just unzip the whole .zip on top of your existing installation.

For simple update, just update the Telemetry.jar in the existing installation and for AMS, also unzip/copy the contents of tracks/ams2 to your Telemetry Tool install directory. There are new trackmaps + the updated track list.

New Install

If you are doing a new install, just unzip the package anywhere in your system (can be in \program files or e.g. \bin\telemetry_tool). On windows start the tool with runWin.bat and select the game mode. On first run the Tool will ask for the location of data files etc. and it will setup all things for you. The default settings should work well.

If you use the Tool on Linux/Mac, check the ReadMe.txt for details on running the Tool on those platforms.

Enjoy and get faster.

Cheers.

Some screenshots below

Session long tyre graphs, i.e. Stats table graphs. Here is data from a race with P + Q + R.
v12_3_ams2_stats_graphs.png

Map with the forward looking pit window
v12_3_AC_map_with_forward_pit_window.png
  • Love
Reactions: GeekyDeaks
Telemetry Tool v12.2 is out

Notable AMS2 fixes/changes/additions:

AMS2

  • Updated Relay to 'AMS2 Shared Memory 13' version. This brings the FCY data to the Tool
  • Added new trackmaps and cars added in 1.4.0.0, 1.4.1.0, 1.4.2 and 1.4.3
  • Fixed event names, which were sometimes not showing properly
  • Removed non-used events from the Lap Data view
  • Added FCY data to the tool, e.g. FCY will be shown at top like SC would be shown.
Other notable fixes/changes/additions
  • many F1 22 fixes
  • a lot of rFactor2 fixes
  • Added new graphs to workspace. Also made the X-Y Plotter and Histograms use the same graphs/traces as Workspace
  • Many little fixes and tweaks. Check the ReadMe.txt for the list of changes/additions
How to Update
Update from 12.0/12.1:
  • Update the Telemetry.jar
  • There is also new AMS2 relay version, so update the bin/ams2_relay, if you use the Tool with AMS2
  • Update at least the tracks dir data for AMS2 and Kartkraft.
Update from pre 12.0 version, just unzip the whole package on top of the old installation. You can do this also if you are updating from 12.0/12.1.

To adjust/fix the track/vehicle ids, it is a good idea to run Tools -> Manage DB Data -> Fix database data

Clean/New install
Clean/New install. Just unzip the package somewhere in your system (can be in 'Program Files' or somewhere else). Then run the tool with runWin.bat. On first run the Tool will ask for data location etc.

Mac/Linux
Mac/Linux install, check the ReadMe.txt for more details.

Enjoy, and get faster ...
A new version 12.1 is out.

Notable AMS2 changes/fixes:
- Added Buenos Aires No 6T track
- Renamed Buenos Aires No 6 to Buenos Aires No 6S

Launcher
- Added option to run feedtester directly from the launcher

Global DB
- Did another data cleaning, you can now see the data from the Global DB from https://racinggametelemetry.com/laptimes.php
- Changed the data of the new window 'Show laptimes from global DB' to show best race laptimes

F1 22
- Fixed issue, where Abu Dhabi lapdata was not saved.

Update
Update from 12.0: Update the Telemetry.jar and at least the tracks dir data for F1 and AMS2

Update from pre 12.0 version, just unzip the whole package on top of the old installation.

Clean/New install
Clean/New install. Just unzip the package somewhere in your system. On first run the Tool will ask for data location etc.

Mac/Linux
Mac/Linux install, check the ReadMe.txt for more details.

Check the ReadMe.txt for details on changes.

Enjoy, and get faster.
New version 12.0 is here.

Notable additions are F1 22 support and the move to Java 17 (new custom JRE included).

For AMS2 this adds the support + trackmaps for the new AMS2 1.3.8.x tracks.

If you find anything odd, please let me know.

Enjoy, and get faster.
New version 11.4 is here.

It took bit longer than anticipated to get it out of the door.

Notable addition is rFactor 2 support.

For AMS2
  • New Shmem Relay using v12 specs. If you use AMS2, update the AMS2 relay from the bin directory in the .zip.
  • New trackmaps + cars data
  • Clutch data in the Driving pane
If you use AMS2 or ACC, it might be good to run the Tools --> Manage DB data -> Fix database data to fix odd issue with car ids.

For update, replace the Telemetry.jar. For AMS2 users, replace also the AMS2 shmem relay.

For new install, just unzip where-ever you like (either in Program Files or any other directory). Run using the runWinLauncher or the game specific .bat files. On first run the Tool will ask location of the data files.

Unless there is a true showstopper, this should be the last 11.x release and next version will be 12.0, when F1 2022 is out.

Enjoy, and get faster.
New version 11.3 is here.

Largest addition is the new 'Workspace'. In short this is like the Telemetry view, but you can save and load the set of traces. E.g. you can have different workspace for setup work, and another for driving inputs. There are also many new traces, e.g. wheel speed diff for sides or wheel locking indicator etc. For each trace there is now few options to adjust the view:
  • Basic: normal trace
  • Diff: blue vs. red trace (or with multilap blue vs each trace)
  • Smooth: smooth the trace along many data points (option varies from 1 to 33)
  • Derivative: calculate the derivate at that point. The slider varies for how long time the derivative is calculated (bit like smoothing)
  • %-change: How large % change (vs. 0 value) happened. Here the slider adjusts, for how many packets the chagne is calculated.

Also there is new 'Field spread' tab, which shows how far apart the cars are on track (dist or delta). This is good way to see while racing, of someone is holding the pack or if someone is approaching you from behind etc.

Notable AMS2 related additions

AMS2
  • Fixed Monza 10k trackmaps
  • Added new Racing USA trackmaps
  • Added v1.3 new car + car class data to the tool
  • Added full Nordschleiffe 24h track map to the tool.

Launcher
Added "reset UI" to the launcher. This will reset the main window position of the Tool. So if for some reason the window positions get corrupted, this can be used to reset those settings. This applies only to the selected game, when you press the 'LAUNCH' button.

General
  • Tried to fix a very random occurrence, where the fastest lap would be replaced with slower lap
  • Made the shortcuts, like CTRL-O work even if menu is not visible
  • Color saving now also saves the opacity
  • Many little tweaks

For update: Copy Telemetry.jar + the tracks directories content to your current installation + in the bin directory the contents of the ACC directory. The changes are in AMS2 and F1 directories. Might also be a good idea to run the 'Tools --> Manage Database --> Fix Database data', if you have run many laps with the new cars..

For new install: Check the ReadMe.txt for the installation instructions. In short, just unzip to somewhere on you system, either to 'Program files' or somewhere else. Now you don't need to anymore edit the baseSettings.xml, as the tool will create it automatically.

Enjoy, and get faster.

Some screenshots

New workspace tab
V113_acc_worspace_2.png
New version is here.

Notable changes:

AMS2
  • Added Monza release trackmaps
  • Added new cars data to the system
KartKraft
  • Added trackmap for Genk
F1 2021
  • Added Portimao trackmap
  • Raw data: Fixed the bug, where the data was always shown for the player and could not be changed
  • Potentially fixed issue, where data for new tracks would not be saved, i.e. make the current version work e.g. with Imola without the need for a new version of the Tool
Statistics table
  • Added wing setup data for games, which provide that data
Racenumber-name map
  • Fixed issue, where the TLA would just show race number, and not the TLA from the file
HTTP Server output
  • Fixed deltaToLeader in the json/aidata
  • Made JSON/tracks to output track list for the current game
+ Many little fixes and tweaks.

For update: Copy Telemetry.jar + the tracks directories content to your current installation. The changes are in AMS2, F1 and KartKraft directories.

For new install: Check the ReadMe.txt for the installation instructions. In short, just unzip to somewhere on you system, either to 'Program files' or somewhere else. Now you don't need to anymore edit the baseSettings.xml, as the tool will create it automatically.

Enjoy, and get faster.
Hello,

New version of my telemetry and race strategy tool is here. This is mainly a bug/stability/performance fix with few interesting additions.

What is new in version 11.1?

Notable AMS2/PC2 related additions:
  • Added track maps + car data for the 1.2.2 additions
  • Updated the PC2/AMS2 relay so that it can read the settings file from the same directory, where it resides. This allows some more flexibility on using the relay
  • Added bit more data to the Driving pane

UDP Redirect
  • Fixed a very nasty random bug, which prevented the UDP redirect to work properly. This fix also improves the performance of the F1 2020 format redirect (ie. the TM SF1000 rim feed).
  • With the UDP Redirect F1 2020 format, the rev lights will blink, if the pit limiter is on.
  • Plenty of smaller fixes/tweaks to the redirect model. This should improve the performance in any game mode, most notably with ACC.
Map
  • Added option to show the map with as transparent background, so if you have only one screen, you could have the map still visible with e.g. the lines driven. See the images below. This does not work on Linux (yet)
Driving
  • Made tyre surface and core temps to be more prominently displayed. Also moved things bit around
And many little tweaks/fixes.

Check the ReadMe.txt for detailed list of updates.

For update, update the Telemetry.jar + tracks\ams2 (if you use AMS2) + the .sh files (if you are on Linux/Mac).

For new install, check the ReadMe.txt file inside the .zip for details on how to install the Tool on Windows, Linux and/or Mac.

Enjoy, and get faster.

PS. A small screenshot of the transparent map on top of the game
V111_AMS2_transparent_map_cutout2.png
New version is here.

Main addition is support for F1 2021.

Notable AMS2 fixes:
- Updated the PC2_Relay to also send UDP data to the IP address set via settings. This will make it easier to run the Telemetry Tool and AMS2 on separate computers. Check the help for more information.

Other small fixes/tweaks/performance tunes are listed in the ReadMe.txt.

For update, just either
a) unzip the whole .zip to the place where you had old installation or
b) unzip the .zip to new place and then on the first run the tool will ask for the location of the (old) data.

New installs, check the ReadMe.txt for installation instructions.

Enjoy, and get faster.
The Telemetry Tool updated to 10.6.

With this version I updated the JRE to version 15. So if you are updating, you need to
- update the bin directory (there is also for Linux and Mac a custom JRE binary included)
- update the lib directory
- update the Telemetry.jar + the .bat (windows) and .sh files (linux/mac)

Key new features

  • Support for ACC driver swap. This feature has been tested, but not extensively. Any feedback is welcome
  • Added Statistics table, which will show much more driving statistics on per lap basis
  • Added Launcher, which you can use instead of the several per game .bat files. The runWin.bat (and runLinux.sh and runMac.sh) have been updated to start the launcher. You can still use the per game .bat files to start the Tool, if you prefer that.
  • Added to UDP forward option to send the data out in F1 2020 format for all supported games. You can use this e.g. with Thrustmaster SF1000 wheel to get data to the wheel's dash, or to send data to other dash, which supports F1 2020 format.
Other notable AMS2 related updates/changes.
  • New tracks + cars + classes from the 1.2 version added
  • Fixed Yaw, Roll & Pitch graphs. They were actually totally wrong, but now they show the correct data.
  • Fixed issues (tool not starting etc), when running the game in different language than English
New users: In short, unzip the .zip to your system (e.g. to Program Files) or some other place. Then start the tool with one of the .bat files (on Windows) or .sh files (on Linux/Mac). The tool will the ask for location of the data etc. Check the ReadMe.txt for details.

Enjoy, and get faster.
10.5 is here.

Biggest addition is system to sync your laptimes + basic lap data to global database. When there is more data, I will add functionality to the Tool, which will allow you to compare your own times to the laptimes of other users of the Telemetry Tool. The tool will ask consent for sending the data, when you start it for the first time.

Notable ASM2 related additions:
  • New AMS2 trackmaps: Spa 1993 and Historic Jacarepagua
  • Fixed detection of car names + data sent from the game
  • Added new cars' data to the Tool
  • Fixed laptime shown on the saved lapdata file name.

New general additions:
  • Multi-histogram view
  • Multi-XY-plotter view
  • Map: Border color added to leader, car in front and behind for easy detection
  • New trackfile format, which is more compact + also loads faster.
  • Tyre pressures are now saved to lapdata files
  • Many little fixes and tweaks.
  • PgUp and PgDown work as zoom in all views (handy if there is no mouse scroller on the system)
I expect this to be last big update for the near future. I will be hunting + fixing odd bugs and working on making the backend bit more robust before next larger release.

For update, backup old installation, then unzip the .zip on top of the old installation. There are many new files in bin, lib and tracks directories.

For new installs, check the ReadMe.txt and/or the Youtube videos on how to install this.

If you have any questions, let me know.

Enjoy, and get faster.

Cheers.
New version of my Telemetry Tool for Automobilista 2 is here.

Notable new and AMS2 related additions:
  • Math Channels: You can create your own math channels and assign them to traces on the Telemetry tab.
  • Updated the new cars from AMS2 v1.1.1.0
  • Fixed UDP redirect. This will now send all data received from the game (shmem + UDP), so race engineers will have full access to all data from the driver
  • Trace color per car corner (FL, FR, RL, RR) can be kept in sync in the Graph Color dialog.
  • Histograms now work also with live lap + get updated as more data comes in
See ReadMe.txt for list of new additions.

For updating with AMS2 in your installation,
  • Replace Telemetry.jar
  • Update the lib directory contents
For new Installations, check the ReadMe.txt and then maybe the installation video on Youtube.

Enjoy, and get faster.
The new 10.3 version is here.

This version has many AMS2/PC2 related additions.

Shared Memory
Biggest new thing is, I added 'Shared-memory-to-UDP-relay', so that the shared memory data can be used. In SHMEM there is more accurate data for some traces, like speed, position and temperatures. Check the ReadMe.txt for more details. It is recommended you use the Relay with the tool, when using PC2/AMS2.

To use the relay you have to enable the Shared Memory option in the AMS2's System settings and then start the relay. I have updated the runWin_AMS2.bat to start the relay automatically.

GHOST LAPS
Added GHOST lap saving, which now works bit like with the F1 feeds. The fastest GHOST from the selected GHOSTS will be set as fastest lap (typically after your 2nd lap against the ghosts), if you choose that for BLUE lap. This requires the use of the PC2/AMS2 SHMEM-to-UDP relay to be used.

Other
  • Added game specific settings page for AMS2. Editing data there will also adjust the relay settings, so you don't need to edit the file.
  • Added trackmaps to the new tracks, including SPA.
  • RACEINFO: Added "time lost due to pitstop" field to the laptime section. Also added text showing how many pitstops and how much to refuel during those pitstops to make it to the end.
  • DRIVING: Replaced the "Turbo" bar with "Torque" bar, as I think torque is more useful in AMS2 than the turbo value. Also added Horsepower data.
  • DRIVING: Added to driving more tyre temp data + a slider for the tyre wear fractions. Handy when trying to learn how your driving affects the tyre wear.
  • RACETIMING: Added PitS field showing how many pitstops each driver has made during the session.
  • STATISTICS: Added some new data, including average fuel use
How to update to this version
Download the .zip and unzip it to where you have the older version installed. There is new AMS2 tracks and in the bin directory the new AMS2/PC2 Sharedmemory-to-UDP relay.

How to install
Check the ReadMe.txt for new install instructions.

Viruscan results for the relays

In the past the relays have been flagged as "dangerous". They are clean, but here are the links to virustotal scans.


Enjoy, and get faster.

Cheers.

Screenshot after 200 lap race with the new Pistop time loss field.

PC2_Indy_500_raceinfo.png
  • Love
Reactions: slayer980
Hi,

Here is the new version of the Telemetry Tool for AMS2.

What is new

Notable AMS2 related additions/changes.
  • Added trackmap for Hockenheim 1988 short, Buskerud x 2, SpeedLand x 4, Nurburgring x 4 & Nordschleiffe x 2
  • Added new cars data from the update v1.4 & V 1.5
  • Fixed Granja Viana Kart track maps
  • Renamed once more all track files and build the system so, future track name changes in the game will have less effect
  • Small AMS2 related fixes here and there
Notable other additions/changes
  • Added to Telemetry Tyre temp + tyre pressure traces. These are also now saved to the lapdata files.
  • Tyre temps + pressures are also available in XY Plotter and Histogram.
  • Map can now display also texts for each turn, like turn names.

Inconsistent laptime data:

If you have driven extensively on the new tracks before this update, it might be that the indexing is bit off in the laptime data from what is in the release. I have created a tool to 1) check if there are inconsistencies in the data and 2) to fix those.

You can check if your laptime data database is ok by running from commandline (in the directory, where you installed this tool)
bin\win\bin\java -classpath Telemetry.jar apps.CheckTrackData

If the tool says, there are inconsistencies, you can then run
bin\win\bin\java -classpath Telemetry.jar apps.FixAMS2Data

What the this does, is that it updates the track indexes based on track length, so when you look at the Laptimes data, the laptime data is correct.

How to update

Replace in your existing installation the Telemetry.jar, the bin directory and also the tracks\ams2 directory. If you use this tool with other games, you could just replace who tracks directory with the in in this .zip.

Install

For new installs, check the ReadMe.txt in .zip on how to install the tool.

Cheers,

Enjoy and get faster
New update to the version 10.

If you are updating, just replace the telemetry.jar in your installation.

If you are doing a new installation, read the ReadMe.txt first on how to install the tool.

Key changes in Version 10.1:

ACC

Added new cars in GT4 DLC
Updated the ACC_Relay to retrieve new data added in 1.15 of ACC. You must use the new relay 1.05 with the Telemetry tool version 10.1.

XY Plotter
Added (optional) scale to the graphs and made it better in showing some of the data

Map
Fixed bad clipping in the map on some situations
Fixes on some areas for the customizable colors
Fixed multilap traces position when zooming/dragging the map
Fixed multlap line widths to adjust when changing the racing line width in settings
Adjusted how the map is positioned on the windows, if user presses reset map.

Comparison view
Fixed other bad clipping of the track map.

UI /Map colors settings
Added trace line width slider for Telemetry trace lines.

F1 2020
Now Shumacher edition cars are also detected by the tool
Fixed issues on some small issues with other game data
Fixed: Wheelspeed was saved as m/s instead of km/h to the lapdata

General
Added option to settings to show the speed in MPH in areas of UI, where it is feasible.
Other little fixes and tweaks

Unless there is some super show-stopper bug, I expect this to be last version for some time, i.e. until there are new tracks for AMS2 or ACC.

Enjoy, and get faster ...
  • Like
Reactions: Mario il virtuale

Latest News

Online or Offline racing?

  • 100% online racing

    Votes: 76 7.0%
  • 75% online 25% offline

    Votes: 115 10.6%
  • 50% online 50% offline

    Votes: 158 14.6%
  • 25% online 75% offline

    Votes: 300 27.8%
  • 100% offline racing

    Votes: 428 39.6%
  • Something else, explain in comment

    Votes: 4 0.4%
Back
Top