SimMidi SimMidi V2.41a

SimMidi V2




SimMidi is a bridge program allowing you the usage of any midi controller as input device in any simulation.
Two ways are provided to do so:

• Monitor midi messages and map it to a vJoy device (vJoy)
• Monitor midi messages and map it to autohotkey script (AHK)

Following midi messages are monitored and send to, when mapped:
Pitch bend > - | vJoy Fader
NoteOn > AHK Button Switch Encoder | vJoy Button Switch Encoder Fader
Control change > AHK Button Switch Encoder | vJoy Button Switch Encoder Fader
If there is a AHK and vJoy mapping for the same midi element set, it is first send via AHK and then to vJoy.


Especially Behringers XTouch Mini controller (XTouch) is fully supported with all of its leds and real telemetry status leds for its encoders.




Features

• 18 + 8 assignable buttons or switches to vJoy virtual gamecontroller and/or AHK. Led status if pressed or switched on.
• 1 assignable analog fader to vJoy.
• 8 assignable encoders to vJoy and/or AHK.
• Real status led updates for the encoders based on the telemetry data recieved for game and car.
• Support for any connected midi controller.
• Support for editable config files.
• No installation of main program needed.
• Detection of game, track and car, seperate configuration per car.
• Encoder led templates for brake balance, turbo, engine brake, ABS, traction control, ERS delivery and ERS recovery provided.
• DRS zone led mode for XTouch.
• H-Shifter mode for XTouch from 2 to 8 gears and reverse gear.
• The fader of the XTouch can be used as handbrake.
• Control any game with key commands or joystick commands.
• Control the SimfeedBack software in expert mode for the SFX 100 motion system with the XTouch controller.

Preconditions

• One or more midi controllers, Behringer XTouch Mini midi controller preferred.
• Optional Udp telemetry provider SimHub from Wotever https://www.simhubdash.com/ for encoder led control installed.
• Optional plugin for SimHub (sourcecode provided) to provide telemetry data for encoder leds with UDP.
• Optional vJoy device driver installed. (Minimum with 64 buttons or more configured.)
• Optional SFX 100 motion system and Simfeedback in expert mode installed.
• Games installed.
• A text editor of your choice for AHK scripts.

For support use https://www.racedepartment.com/threads/support-thread-simmidi.169399/