This mod adds what it says on the tin, a Turbo and most of the supporting parts you need for it.
As this is my first real mod there are more issues than you may expect, nothing gamebreaking but still issues nontheless.
Featuring:
Credits:
Myself - models, turbo simulation and mod concept work
BrennFuchS - porting to BSFD
epsypolym - Bolting System For Dummies (BSFD)
As this is my first real mod there are more issues than you may expect, nothing gamebreaking but still issues nontheless.
Featuring:
- In depth behaviour (effecting fuel mix etc)
- Wear simulation, turbo will get laggier and able to produce less power the more worn it is
- Oil Cooler to help with its extra temperature
- Installable parts with bolts
- New wrecked car
- New way to die
- Modelled to fit visually into MSC's existing style
- Support for STOCK & RACE carbs
- Not having the race exhaust already purchased will break the mod in a way that saving won't be possible and it will throw a "Void OnSave()" error
- Another unknown thing in a few saves will cause the mod to act as if no parts are ever fitted (I'm not sure what causes this, but spamming reviews and so on with"WAHHH IT DOESNT WORK" is not helpful
) - Part installation order is overly specific and a little buggy (check the how to install section if you run into this)
- This is my first attempt at C#, so there is a lot of unnecessary performance loss due to lack of optimisation in code.
- Part attachment triggers do not always get enabled on first game load (the whole "WAAAH I CANT FIT PARTS") thing, can sometimes be fixed
NUMBERED IN ORDER!
1: Remove your old exhaust headers
2: Fit racing exhaust pipe if you haven't already
3: Make sure you have either the STOCK or RACE carburators fitted (Twin will not fit)
(Optional): Fit the wastegate actuator and filter to the turbo now
4: Fit the turbo itself to the turbo headers 2x 7mm bolts
5: Fit your turbo headers to the engine, 5x 8mm bolts
6: (STOCK CARB): fit the carb pipe to... the carb
6: (RACE CARB): fit the cold side, then the intercooler and hot side pipes
7: Fit the downpipe to the race exhaust, make sure the 7mm bolts on the front of the exhaust are loose! 4x 7mm bolts
8: Fit the oil lines to the block, if you dont the turbo is going to not last long.
(Optional): Fit the oil cooler to the front of the car body 2x 7mm bolts
(Optional): Fit boost gauge onto left corner of your dashboard
Done!
1: Remove your old exhaust headers
2: Fit racing exhaust pipe if you haven't already
3: Make sure you have either the STOCK or RACE carburators fitted (Twin will not fit)
(Optional): Fit the wastegate actuator and filter to the turbo now
4: Fit the turbo itself to the turbo headers 2x 7mm bolts
5: Fit your turbo headers to the engine, 5x 8mm bolts
6: (STOCK CARB): fit the carb pipe to... the carb
6: (RACE CARB): fit the cold side, then the intercooler and hot side pipes
7: Fit the downpipe to the race exhaust, make sure the 7mm bolts on the front of the exhaust are loose! 4x 7mm bolts
8: Fit the oil lines to the block, if you dont the turbo is going to not last long.
(Optional): Fit the oil cooler to the front of the car body 2x 7mm bolts
(Optional): Fit boost gauge onto left corner of your dashboard
Done!
Q: "My engine explodes while at full throttle with this installed!"
A: Make sure your AFR is under 15, and lower your wastegate PSI.
Q: "How do i install it?????"
A: refer to this youtube video or the installation guide above
Q: "why is there smoke coming out of the engine bay"
A: How did you read this before the text literally above you?
Q: "why doesn't this add 600hp? bad mod( add power"
A: Because this is a turbo mod somewhat grounded in vague confines of reality, if you want a 600hp car in MSC go make another one. Satsuma is a crappy economy car, not anything remotely fast. You may be playing the wrong game for this.
A: Make sure your AFR is under 15, and lower your wastegate PSI.
Q: "How do i install it?????"
A: refer to this youtube video or the installation guide above
Q: "why is there smoke coming out of the engine bay"
A: How did you read this before the text literally above you?
Q: "why doesn't this add 600hp? bad mod
( add power"A: Because this is a turbo mod somewhat grounded in vague confines of reality, if you want a 600hp car in MSC go make another one. Satsuma is a crappy economy car, not anything remotely fast. You may be playing the wrong game for this.
The turbo itself can either be bought in "like new" condition from the Parc Ferme during rally weekends
OR by delivering Fleetari the new junk car the mod adds, and paying him a fee.
All the supporting parts for the turbo are only able to be purchased from the Parc Ferme
OR by delivering Fleetari the new junk car the mod adds, and paying him a fee.
- Find the wrecked car
- Tow it to Fleetari's
- Check his desk for the money you're going to pay him
- Leave the area
- Wait 15-25 minutes for his phone call spam (eventually will fix this lol)
- Check under the plastic chair next to his garage door for your turbo
- Buy the rest of what you need from the Parc Ferme during rally weekends
- Done!
Credits:
Myself - models, turbo simulation and mod concept work
BrennFuchS - porting to BSFD
epsypolym - Bolting System For Dummies (BSFD)
