FFB Project CARS2

FFB Project CARS2 FFB v3.0 - TEST PORSCHE TAYCAN

Login or Register an account to download this content
Overview Updates (10) Reviews (60) History Discussion
Ask a question
Reviews (60) History
Latest Most helpful User rating
E
Don't like the reduction in revolution for this revision, seems much harder to catch a car in an emergency oversteer scenario/drifting. Is there a 900/1080 degree version of this file for t300s? Might just go back to 3.x verison.

Great work regardless, huge difference from the g25/gran turismo days on ps3.
Upvote 0 Downvote
G
Thnx man, great work! But i got an issue with my t-gt wheel, it cannot work with pc2 on pc=( when i pick up custom wheel- it says that not all setting applyed, i dont know what i have to do with it
Upvote 0 Downvote
Vimana51
Excellent. Bon boulot
Upvote 0 Downvote
W
Once again. Great Job.
Upvote 0 Downvote
W
Unbelievable how you made an undriveable game, a great, fun experience! 10000/10!
Upvote 0 Downvote
A
i'm faster ! cars are easier to drive ! all good ! big thank !
Upvote 0 Downvote
D
First time I can do consistent lap times with my tmx, AMAZING !
Upvote 0 Downvote
U
I have been pretty much using Jack Spades FFB settings since they were originally released and updated when needed, I found his settings to really bring my TX to life once i tinkered with a few in game settings. However ive now tried these settings an initially the FFB felt weak and lackluster. again by simply following the advice also given within the download, i tinkered with the gain slightly and the volume and i have staright away beaten a few of my current PB's on some tracks. The FFB feels very balanced and oddly feels like I can feel the weight transfer and feel the loss of control better. Excellent job with these settings and highly recommend, but you do need to play with the in game strengths to find what works for you better.
Upvote 0 Downvote
nicsos123
It's good thx
Upvote 0 Downvote
D
i m in tx3 and i improved a lot in the control of the car after this ffb. i take this forum to say again thx to slawek for the work that he did for the team and for all of you :)
Upvote 0 Downvote
P
I tried with my t500RS and I use the TX file, after reading the pdf, it's ok? I will test more thoroughly, but I was very pleasantly surprised! Great! The difference is obvious especially when we put the FFB immersive or informative just after ... to compare
THX !!! great !!!
SlawekTX3
SlawekTX3
Thanks ;)
Upvote 0 Downvote
mr.four
Well done. Really liking what you've come up with here.
SlawekTX3
SlawekTX3
Thanks
Upvote 0 Downvote
Shad3R
TMX/T150 User here, this ffb file is for me a lot better than jack spade`s one, it gives me more power at oversteer and i can correct a lot more of things
Thanks!
SlawekTX3
SlawekTX3
thank you for your return and your feelings. The new version must arrive late in the week. She will correct problems with the rear train ;)
Upvote 0 Downvote
skylinegtr34
superd, with ts xw sparco 310, this ffb it's really enjoy, before i use the jack spade, but after patch, i don't find any setup really good, this it's solution.
only one question: if possible have a little bit more ffb on bump in breaking point?? exaple, i try 488gt3 on monza, at first chicane, the asphalt it's very bumpy, but on wheel i feel too low bump, how setting need increase?? thanks!!
SlawekTX3
SlawekTX3
Thanks for your return. The new version corrects quite a lot of worries. I still have to close the new explanatory pdf and it will come out.
Upvote 0 Downvote
H
Amazing job!
SlawekTX3
SlawekTX3
Thanks ;)
Upvote 0 Downvote
S
I've been struggling to get my T150 (same as TMX) cheapo wheel working well in pcars2 for ages now, but now that i've tried this it suddenly transformed into something beautiful. Now i can catch cars sliding, drift, do fast racing on complicated tracks, etc. no problem. Truly spectacular work.
SlawekTX3
SlawekTX3
Thanks ;)
Upvote 0 Downvote
Ciba1991
Actually enjoying this more than Jack Spades work, which is already really good. Great feeling on the T-GT, but had to put gain to 100, recommended values did not work for me. Other than that i would mention that there is a bit of clipping on the high end, nothing too major, and i had to add a bit more deadzone removal. But otherwise keep up the excellent work!
SlawekTX3
SlawekTX3
Thank you for your message. Yes, TG-T is a complex base to settle. Much more complex than the TS-PC for example. Then, we all have our small requirements, so we must adapt according to your tastes. But I am very happy that my work has been a good foundation for you. I will certainly propose an update of the file because I had quite a return private with the right indications to follow.
Upvote 0 Downvote
PCCF Ben
Tks Slawek ;)
SlawekTX3
SlawekTX3
with pleasure ;)
Upvote 0 Downvote
bbspadon
Very informative about front tyres, one of the best ffb about that! But sadly not enough information about rear tyres or rear train, so actually this FFB is mostly incomplete. You're on the path, keep going. For now, Jack Spade files are more complete, even less specific ;-)
SlawekTX3
SlawekTX3
I invite you to work on your own version and not to copy on others. Maybe it will be beneficial. Personally, I did not have negative feedback about the rear tires ;-)
Upvote 0 Downvote
C
Wow. Wow, Wow !!!!!!!
My Ts-Pc Racer has finally what it deserves ! Great work, most useful download to date. Merci beacoup mes amis !!!!!!
Thrustmaster wheels owners please download this file and you will enjoy a very effective FFB, very useful for best car handling.
SlawekTX3
SlawekTX3
Thank you very much for your message. I am very happy to see that my work brings you satisfaction. Do not hesitate if you have any questions
Upvote 0 Downvote

Latest News

Are you buying car setups?

  • Yes

  • No

Results are only viewable after voting.
See comments…
Back
Top