Very very basic skinning tutorial ML2166

ML2166

If quizzes are quizzical then what are tests?
Premium
Just a very quick basic skinning tutorial I've put together.

It concentrates on re-colouring a Force India car.

But the basics can and will be used to create your own liveries.

Like I said very very basic, I hope someone finds parts of it useful.



You use the same basic principals for the helmet models too.

As with the cars, you can lay the logos and lines etc direct onto the helmet model, but make sure as with the cars you have a blank layer ready first. The secret is layers......lots of them.
 
ONLY if you have sparetime ML2166, then a small request from here - maybe a tutorial for 3D render images ? once the car is made for example, is it difficult or hard to do 3D stuff ? I myself who has a "quite good experience" in PSP9, hard a hard way in doing 3D with 3DSIM for example.
Any advice is greatly appreciated.
 
Just a very quick basic skinning tutorial I've put together.

It concentrates on re-colouring a Force India car.

But the basics can and will be used to create your own liveries.

Like I said very very basic, I hope someone finds parts of it useful.



You use the same basic principals for the helmet models too.

As with the cars, you can lay the logos and lines etc direct onto the helmet model, but make sure as with the cars you have a blank layer ready first. The secret is layers......lots of them.


When i merge down a sponsor logo put on a 3d model, a lot of time just an half appear on the car, did i miss something or happen sometime ? And i always put my sponsor on the higher layer on the drawing sheet
 
When i merge down a sponsor logo put on a 3d model, a lot of time just an half appear on the car, did i miss something or happen sometime ? And i always put my sponsor on the higher layer on the drawing sheet


Sometimes that will happen.

It's a combination of model shape and the paint fall off settings in PS.
 
Try setting paint fall off options too 90 degrees by 90 degrees.

See if that helps.

If not, it's probably just down to where you are trying to place the logo.
 
Hi, please i need help, why i have this problem? What i need to do? please reply me :)

2zrgdwz.png
 
SImply when you import and save something with a PSSG tool, you cant reopen re import and re save it after, you need to have a original file to do that. I got the same problem so the only answer you can get is that
 
Just a very quick basic skinning tutorial I've put together.

It concentrates on re-colouring a Force India car.

But the basics can and will be used to create your own liveries.

Like I said very very basic, I hope someone finds parts of it useful.



You use the same basic principals for the helmet models too.

As with the cars, you can lay the logos and lines etc direct onto the helmet model, but make sure as with the cars you have a blank layer ready first. The secret is layers......lots of them.
Is it possible that the tutorial went off youtube?? I can't see the video...
 

Latest News

Online or Offline racing?

  • 100% online racing

    Votes: 74 7.2%
  • 75% online 25% offline

    Votes: 108 10.5%
  • 50% online 50% offline

    Votes: 150 14.5%
  • 25% online 75% offline

    Votes: 284 27.5%
  • 100% offline racing

    Votes: 412 39.9%
  • Something else, explain in comment

    Votes: 4 0.4%
Back
Top