TrackEd Help

I'm trying to figure out why the track I made with Bob's Track Builder isn't showing up normally in TrackEd, but will work just fine in racer itself. Here is the screenshot:
(If it is not showing up, basically the 3D Viewer of the track is showing all gray.)
 
Here is the QLOG:

Mon Apr 04 16:09:43 (INFO): [tracked/992] Loading track 'Racetrack'
Mon Apr 04 16:09:43 (WARN): [tracked/992] QInfo: can't open 'data/tracks/Racetrack/spline.ini'
Mon Apr 04 16:09:43 (WARN): [tracked/992] No splines found for track 'Racetrack', has impact on AI/minimap etc.
Mon Apr 04 16:09:44 (WARN): [tracked/992] No surfaces found that match pattern 'rgeddirt*'
Mon Apr 04 16:09:44 (WARN): [tracked/992] No surfaces found that match pattern 'rgedgrav*'
Mon Apr 04 16:09:44 (WARN): [tracked/992] No surfaces found that match pattern 'rmbl*'
Mon Apr 04 16:09:45 (WARN): [tracked/992] No splines found; minimap is disabled.
Mon Apr 04 16:09:50 (WARN): [tracked/992] RAudio:dtor(); not all producers were removed yet
Mon Apr 04 16:09:50 (WARN): [tracked/992] producer 0: data/audio/rain.wav
Mon Apr 04 16:09:50 (WARN): [tracked/992] producer 1: data/audio/thunder1.wav
Mon Apr 04 16:09:50 (WARN): [tracked/992] producer 2: data/audio/thunder2.wav
Mon Apr 04 16:09:50 (WARN): [tracked/992] producer 3: data/audio/thunder3.wav
Mon Apr 04 16:09:50 (WARN): [tracked/992] producer 4: data/audio/thunder4.wav
Mon Apr 04 16:09:50 (WARN): [tracked/992] producer 5: data/audio/thunder5.wav
Mon Apr 04 16:09:50 (WARN): [tracked/992] producer 6: data/audio/thunder6.wav
Mon Apr 04 16:09:50 (WARN): [tracked/992] RAudio:dtor(); not all samples were removed yet
 
It's all working ok here.

The problem is that when trackEd loads, the camera is around the 0,0,0 origin or something like that.

And because the track is about 400m 'high' in the world, you can't see it because you're well underneath it.

You need to move your viewpoint up a bit in trackEd before you'll see it.


Ideally you'd set your track to around 0 height since it's better for the physics engine to run with the car as close to world 0,0,0 as possible most of the time :)

Cheers

Dave
 
It's all working ok here.

The problem is that when trackEd loads, the camera is around the 0,0,0 origin or something like that.

And because the track is about 400m 'high' in the world, you can't see it because you're well underneath it.

You need to move your viewpoint up a bit in trackEd before you'll see it.


Ideally you'd set your track to around 0 height since it's better for the physics engine to run with the car as close to world 0,0,0 as possible most of the time :)

Cheers

Dave
Im using racer 0.7.3, will that affect it?
 
I'm not sure if that will affect things as I've not run that version for a long while.

Try set cull=none on all the shaders, and then you should be able to see them from both sides of the mesh.
That might help you find and then navigate to them in the scene.

Also I'm not sure if your object flags are correct. I think you should just need flags=6 for anything you can drive on with the car or drive into with the car (collide and wheels interactions)
That might be impacting the trackEd operation.
But on this old version I can't be 100% sure on that flags issue as I don't have an old trackEd.

Thanks

Dave
 

Latest News

How long have you been simracing

  • < 1 year

    Votes: 319 15.4%
  • < 2 years

    Votes: 221 10.6%
  • < 3 years

    Votes: 214 10.3%
  • < 4 years

    Votes: 164 7.9%
  • < 5 years

    Votes: 280 13.5%
  • < 10 years

    Votes: 240 11.6%
  • < 15 years

    Votes: 158 7.6%
  • < 20 years

    Votes: 120 5.8%
  • < 25 years

    Votes: 92 4.4%
  • Ok, I am a dinosaur

    Votes: 269 13.0%
Back
Top