1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Thrustmaster Ferrari wheel MBG Mod V2

Discussion in 'Sim Racing Hardware' started by giuseppe imbrogno, Jul 28, 2014.

  1. Finally, after months of study and work .... the mod is ready

    to the contrary of the previous mod no longer has the original electronics but is only entrusted to the pcb of the display where the keys are connected push button (nkk 2011) and keys toggle switch (front and side), rotary-encoder, rotary switch and clutch, change has the original blades with reinforced springs and buttons knitter,
    the front end has been completely rebuilt with plastic and putty to recreate the famous step below the encoder housing and GRP Boat for display as cutting the plastic thrustmaster you can not fit it as reality, was mounted a quick release formula (sparco ) ahh i forgot manettini were made by me on two layers of rubber and covered with spray and coiled cord 5mm

    [​IMG]

    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]



    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]



    [​IMG]


     
  2. Von Butters

    Von Butters
    Premium Member

    Awesome mod mate. I really wish i could do something like this but lack of health/wealth/dough prevents me.
    Gives me something to aspire to though.
    Again, very nice!