• "Auto racing began 5 minutes after the second car was built." - Henry Ford
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Dear Guest. Follow RaceDepartment on Twitter, Facebook, Instagram, Twitch, Steam and YouTube.

Stock Car Extreme bug report thread (READ THE OPENING POST)

Discussion in 'Stock Car Extreme' started by Renato Simioni, Oct 30, 2015.

  1. IceCreamKimi

    IceCreamKimi

    Messages:
    19
    Ratings:
    +5
    Track & Layout Used: Santa Cruz do Sul
    Car Used: SuperV8
    Applicable Settings: Tyre wear X7, soft compound tire, full fuel load, tire wear is on.
    Report: SuperV8 AI Cars seem to experience no tire wear
    Steps to reproduce: Start a race with tire wear set to x7 and let AI take control of your car for a few laps then retake control.

    I think there is a problem with AI tire wear for the SuperV8's. The AI cars don't seem to experience any tire wear at all. If I start a race with x7 tire wear and let the AI take control for 10 laps no tire wear is experienced when I retake control. If I try a 20 lap normal race myself I will need to pit a few times to change tires where the AI cars never pit.

    I tried the same thing with Formula Classic and the AI did experience the expected tire wear.
     
  2. Jan Mikuž

    Jan Mikuž

    Messages:
    1,039
    Ratings:
    +151
    Track & Layout Used: any
    Car Used: FClassic
    Applicable Settings: Any
    Report: I'm experiencing heavy fps drops when driving the FClassic.
    Something about the cockpit on FClassic seems to be unoptimized or especially graphically tasking.
     
  3. RaceMan763

    RaceMan763

    Messages:
    27
    Ratings:
    +7
    UPDATE 1.51 fixed this problem.

    Track & Layout Used
    : any
    Report: Car is invisible in Test Day session.
    Cars Affected: Formula3, Formula Vee, Opala 86, probably others
    Cars Not Affected: SuperV8, Stock Car

    Weirdest thing. Did a complete reinstall already, didn't fix it. Practice sessions during Single Race are not affected.
     
    Last edited: Nov 24, 2015
  4. TurcoMaldade_

    TurcoMaldade_
    Premium

    Messages:
    189
    Ratings:
    +114
    Every time I start the sim, after 5 seconds open, it crashed back to desktop. I just downloaded it all over again, it's a clean install. No mod, no 3rd party plugins, no nothing. And the problem keeps happening over and over and over.

    I have NO IDEA what to do.
     
  5. Rodrigo Vicente

    Rodrigo Vicente

    Messages:
    22
    Ratings:
    +7
    It's not a bug, but a doubt. The GSC works in 2560x1080 Ultrawide monitor?
     
  6. TurcoMaldade_

    TurcoMaldade_
    Premium

    Messages:
    189
    Ratings:
    +114
  7. Leo Bonilha

    Leo Bonilha

    Messages:
    17
    Ratings:
    +0
    After the upgrade 1.51, the dedicated server does not recognize the cars Copa Petrobrás de Marcas.
    The cars do not appear for selection in creating dedicated.
     
  8. Kevin Pheiffer

    Kevin Pheiffer

    Messages:
    492
    Ratings:
    +133
    Just tested it.......works fine. Try running sync.
     
  9. Leo Bonilha

    Leo Bonilha

    Messages:
    17
    Ratings:
    +0
    I have tested here. After small update of 2.9MB returned to work. ;)
     
  10. PicoBp

    PicoBp
    #26 | HSRC - Banzaaaiii Touring Car Crew Premium

    Messages:
    786
    Ratings:
    +460
    Yes, it does perfectly. ;)
     
    • Like Like x 1
  11. s2173

    s2173
    Premium

    Messages:
    97
    Ratings:
    +23
    Track & Layout Used: Any
    Car Used: Any
    Applicable Settings: Any
    Report: Panning around the car doesnt work anymore. In any gmotor based game, you can look at the car from swingman with page up and then rotate around with 4-6 on the numpad, zoom in and out with 7 and 9, rotate up and down with 8 and 2 - I like it for replays. After 1.50, including 1.51, these buttons just move the view a step to the side, and nothing more.
    Steps to reproduce: Try to pan the car around on replays.
     
  12. Alex Sawczuk

    Alex Sawczuk
    Reiza Studios

    Messages:
    1,382
    Ratings:
    +998
    You probably just need to reassign the keys.
     
  13. Mikedem

    Mikedem

    Messages:
    3
    Ratings:
    +5
    Track & Layout Used: Any
    Car Used: Any
    Applicable Settings: Any
    Report: Running any race against AI and as the track goes green all AI cars seem to slow drastically at the start/finish line.
    Steps to reproduce: start any race - tried with qualifying or just skipping directly to race. Made no difference. Basically the only way to avoid an accident is when the green light comes on mash the brake or you crash into the cars ahead.
     
  14. s2173

    s2173
    Premium

    Messages:
    97
    Ratings:
    +23
    Ok, that fixed it... thanks.
     
  15. muzarati

    muzarati

    Messages:
    344
    Ratings:
    +28
    Track & Layout Used: Montreal modern (benchmark)
    Car Used: SuperV8
    Applicable Settings: Max shadows
    Report: Still getting FPS hit compared to all other cars at certain points on track
    Steps to reproduce: Lap of Montreal, field of 25 SuperV8, shadows on max
     
  16. guod

    guod

    Messages:
    3
    Ratings:
    +3
    Version: 1.51 Steam or non-Steam, both versions. Not an issue with version 1.50.
    Track & Layout Used
    : Spielberg Historic - Austrian Ring Historic GP.
    Car Used: Formula Retro.
    Applicable Settings: Dedicated server running as Admin.
    Clean installation: Tried with both 1.51 Steam or non-Steam.
    Report: Only Emmo and his car is available. See attached image.
    Steps to reproduce: Select Formula Retro in dedicated server.
    Troubleshooting Attempted: Everything listed.

    Update 1: If a driver selects Emmo, then they can join the server without an error. If they try to select any other cars when logging into the server, the server shows a camaross.hdv error and car not recognized. The client sees F_Retro.hdv mismatch. If the version 1.50 dedicatedserver.exe is used instead of the version 1.51 dedicatedserver.exe, all the Formula Retro cars are viewable in the Available Opponents window, but when the client tries to join the dedicated server they still see F_Retro.hdv mismatch.
     

    Attached Files:

    Last edited: Nov 25, 2015
    • Agree Agree x 2
  17. Rob Fitness

    Rob Fitness

    Messages:
    812
    Ratings:
    +666
    just downloaded the full v1.51 non steam to a clean install, and it wont load just get a heap of different crashdump errors. seems a different number each time... i went to run the sync and it wanted to DL 500mbs worth of files that mainly look like DDS car files. should i let it sync.?
     
  18. PieterN

    PieterN
    Premium

    Messages:
    427
    Ratings:
    +94
    Track & Layout Used: Phillip Island (by Patrick)
    Car Used: SuperV8
    Applicable Settings: AI strength 100 %, low agression
    Report: Collision box isn't correct. My car didn't touch the AI car and yet my and the AI car were damaged.
    Steps to reproduce: Repeat
     

    Attached Files:

    Last edited: Nov 27, 2015
  19. tarsomarques

    tarsomarques

    Messages:
    1
    Ratings:
    +0
    V8 Supercars: engine don´t start on the track, only pitlane
     
  20. JeffL

    JeffL
    Right on Brother, I hear ya, it's all good.

    Messages:
    1,966
    Ratings:
    +856
    Having an odd audio problem. With the sound fx if I set them on 0 they are off. When I raise volume to 1 the curb sounds are really loud. If you raise the sound to 100 every thing else, wind, road, shifting, etc get louder but the curbs don't. The curbs sound are just really loud all the time. Anybody else get this.