Sell Simucube 2 Pro w/ Accessories and Wireless Ascher Wheel/OMP Rim

[Bommas]

(SOLD)

Hi,

More stuff from my parted out rig. Selling due to needing a house deposit.

Bought 16th July 2021.

Still covered under it's 2 year warranty.

It includes:
Simucube 2 Pro with single battery and premium emergency stop
Xero Play QR (Will provide original QR as well as the little white box containing all adapters and bolts)
Digital Dash using a Nextion 4.3” and a custom housing that attaches at two points with magnets
LEV-1 Universal Multi Adjustable Dash Mount (Allows for the dash to extend past your monitors)
Ascher B16L-SC Wireless
OMP Rim
BG 40mm Extender

Price New: £2,284
My Price: £1,750
Saving: £534

The price is firm and it would ideally be collection from Portsmouth, UK or delivery only within the UK at buyers expense.

Currently I’m not looking to part this further and would like this to go all to one person.

If you require anymore pictures or info, let me know.

Thanks, Tom

 

[Tomes105]

Hi,

More stuff from my parted out rig. Selling due to needing a house deposit.

Bought 16th July 2021.

Still covered under it's 2 year warranty.

It includes:
Simucube 2 Pro with single battery and premium emergency stop
Xero Play QR (Will provide original QR as well as the little white box containing all adapters and bolts)
Digital Dash using a Nextion 4.3” and a custom housing that attaches at two points with magnets
LEV-1 Universal Multi Adjustable Dash Mount (Allows for the dash to extend past your monitors)
Ascher B16L-SC Wireless
OMP Rim
BG 40mm Extender

Price New: £2,284
My Price: £1,750
Saving: £534

The price is firm and it would ideally be collection from Portsmouth, UK or delivery only within the UK at buyers expense.

Currently I’m not looking to part this further and would like this to go all to one person.

If you require anymore pictures or info, let me know.

Thanks, Tom

Is this still for sale

 

[Bommas]

Is this still for sale

Hi,

Unfortunately i've parted out the digital dash and the B&G 60mm spacer.

However the OMP Superquadro Rim, Ascher B16L-SC and SC2 with Xero-Play QR and Premium Emergency Stop is still available.

Thanks,
Tom

 

[Tomes105]

Hi,

Unfortunately i've parted out the digital dash and the B&G 60mm spacer.

However the OMP Superquadro Rim, Ascher B16L-SC and SC2 with Xero-Play QR and Premium Emergency Stop is still available.

Thanks,
Tom

What price you after now then

 

[Bommas]

What price you after now then

£1550 for it all. Can send links to the facebook marketplace posts for all if needed.

 

[Tomes105]

£1550 for it all. Can send links to the facebook marketplace posts for all if needed.

Sorry asking so late and I won’t message you again till tomoz but is there any room on price ……. I only live just over an hour away so would like to see it powered on before handing total over

 

[Bommas]

Unfortunately price is firm. Already £620 cheaper than new and it’s only 6 months old.

Of course you can see it powered on. Might be a bit awkward as I’d have to do it on my normal desktop PC. But if you were serious I’d be happy to do it.

Thanks,
Tom

 

[m288a]

Hi, sorry. I know this thread is sold but can I ask you a question about your Lev mount?

Does it come fully apart and could you spin the mounting brackets the other way round if you wanted the dash to sit way higher?

 

[Bommas]

Hi, sorry. I know this thread is sold but can I ask you a question about your Lev mount?

Does it come fully apart and could you spin the mounting brackets the other way round if you wanted the dash to sit way higher?

Yeah I don’t see why you couldn’t spin them around, the end is just attached by 2 bolts, so I don’t see why orientation would matter.

It doesn’t come fully apart, you can only loosen the two side bolts to adjust the angle of the screen mount.

 

[dean g]

I noticed on the lev mount you have a piece with magnets attached too place your dash on, i did look on simcore but i couldn't find anything like that. Is that a 3d printed part and if so do you have a link too the STL files please?

Also the one in the photo is the Simucube 2 lev mount correct, so it fits a normal Simucube 2 motor mount and you don't need simcore mount for it?

Thank you in advance and sorry to bother you as i see the post states sold.

 

[Bommas]

I noticed on the lev mount you have a piece with magnets attached too place your dash on, i did look on simcore but i couldn't find anything like that. Is that a 3d printed part and if so do you have a link too the STL files please?

Also the one in the photo is the Simucube 2 lev mount correct, so it fits a normal Simucube 2 motor mount and you don't need simcore mount for it?

Thank you in advance and sorry to bother you as i see the post states sold.

That’s correct it’s the Simucube 2 motor mount. Nothing extra. The thing with the magnets was bought from a guy off Etsy called SimRacingAddict, who also 3D printed the enclosure for the Nextion Screen.