• Bookmark hashtag #RDLMS on Twitter, Facebook and Instagram
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PC Sensitivity options

Discussion in 'Project CARS' started by Karenius, May 8, 2015.

  1. Can anyone tell me what these settings do?


    I've changed Steering sensitivity to 100 and 0 and went on a track to turn the wheel but I don't notice any difference, same with the pedals
    Last edited: May 8, 2015
  2. I may be a little off in my understanding but I think that slider works like Steering Saturation.

    For example at 50% you get equal input before and after HALF lock.
    At 100% you get more steering input BEFORE half lock.
    At 0% you get more steering input AFTER half lock.

    I really haven't messed with this as much as the FFB settings. I believe mine is set to 44 and seems to work nicely.
  3. I wish there was some indication though...
    Especially for the pedals, I don't know what I'm changing because I have no visual indication.
    Its impossible for me to drive some of the high power cars if I put the throttle sensitivity to 50%. The throttle pedal felt like an on-off switch.
    0% felt way better. Don't even know what the default values were

    Also changing steering sensitivity doesn't give you any visual indication, the driver will turn the wheel at the same speed no matter if 0% or 100% it was always 1:1 to my wheel movement - but the car wouldn't turn in at 0% or turn in too much at 100%