• Race hard. Race fair.
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sectors

Discussion in 'Bob's Track Builder' started by maniak300, Jan 18, 2010.

  1. maniak300

    maniak300

    Messages:
    39
    Ratings:
    +0
    Hello

    Is it possible to create more sectors? Usually we have a 3 sectors and 2 checkpoints (without finish line). I think, we should have a choice to get 1, 2, 3 or 10 checkpoints. It would be good for long tracks like Nordschleife, La Sarthe or rally stages.


    Thanks
     
  2. Emery

    Emery

    Messages:
    920
    Ratings:
    +227
    I don't think so in rFactor. It's not hard to create the objects, but the biggest problem is the scorekeeper only displays three sectors.
     
  3. mianiak

    mianiak

    Messages:
    578
    Ratings:
    +16
    As far as I know, It can't be done. If it is to stop people cutting corners, you can set invisible walls.
     
  4. lordpantsington

    lordpantsington

    Messages:
    100
    Ratings:
    +0
    rF's timing scheme is limited to those 3 sectors per lap. BUT there is nothing stopping you from using multiple laps per loop. If it takes 3 laps to get through one physical loop you would just need to adjust the race length x3. The problem is then comparing sector times, S1,lap1 should not be compared to S1, lap 2... Use my same instancing method as is used for point to point timing.
    If you just want to see where you are losing time get Motec, it will break a lap down into turns and straights making it a ton easier to see where you are losing time.