• "Mwoah" - Kimi Räikkönen
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Dear Guest. Follow RaceDepartment on Twitter, Facebook, Instagram, Twitch, Steam and YouTube.

rFactor Spa Needed!

Discussion in 'rFactor' started by Mattie941, Jul 17, 2017.

  1. Mattie941

    Mattie941

    Messages:
    7
    Ratings:
    +0
    Hello everyone,

    Has anyone found a version of Spa that works with the AI. I have tried every version I can find but they either can't run with 32 cars or the AI crash into the wall entering the pit-lane or don't work well.

    The versions I have tried:
    Spa Francorchamp 1.00 by (Euro)Danny
    Spa Francorchamps 2005 1.00 by TheLarry1993
    Spa Francorchamps 2015 + 2016 1.00 by WCP series
    Spa-Francorchamps 2009 1.01 by I.P.M
    MMG Spa 2007 1.0
    Spa 2010 by LMT
    Xtremefactor FS2010/FS2011/2007/2007NB

    Any other suggestions or download links? It's the only track I'm desperate to get?

    Cheers,

    Matt
     
    Last edited: Jul 29, 2017
  2. Dinos I

    Dinos I

    Messages:
    60
    Ratings:
    +24
    Hi. As for me the best versions are IPM 2011 and WCP 2016, but I'm not sure about the AIs on these tracks. Anyway if the AIs crash entering the pits you can simply make those walls on pit entrance non collidable
     
  3. Mattie941

    Mattie941

    Messages:
    7
    Ratings:
    +0
    How do I make a wall non-collidable?
     
  4. Dinos I

    Dinos I

    Messages:
    60
    Ratings:
    +24
    You gonna need gMotor 2.0 MAS Utility and 3dSimEd.
    First extract all files from track .mas files (e.g. Spa_16.MAS, Spa_16map.MAS) to some folder using MAS Utility.
    Then search the wall you need to make non collidable. To do this you need to open extracted .gmt files with 3dSimEd. You will need to visually identify which object is yours. So open them one by one. To simplify the process and in order not to open every single file, look for the files which names contain "wall", "fence" etc. Once the needed object found search the name of this object in .scn file of the track.
    For example: your oject name is "twall_lescombes2", in .scn you find the following lines:
    Instance=twall_lescombes2
    {
    MeshFile=twall_lescombes2.gmt CollTarget=true HATTarget=true

    change CollTarget to false (CollTarget=false) and save the changes.
    After these adjustments when the car touches the wall there will be no collision, the car will just go through it.
     
  5. Mattie941

    Mattie941

    Messages:
    7
    Ratings:
    +0
    Unfortunately I can't find a version of Spa where the pit wall is the sole issue. After a lot of testing I have found numerous testing with most of the tracks.

    Spa Francorchamp 1.00 by (Euro)Danny
    • poor graphics, unrealistic track
    Spa Francorchamps 2005 1.00 by TheLarry1993 +2007 update
    • cars dont not pull into their pit boxes and do not follow pitlane speed limit
    Spa Francorchamps 2015 + 2016 by WCP series
    • AI crash into each other and take poor lines
    Spa-Francorchamps 2010 by LMT
    • green flag fails to drop at start of the race
    Spa-Francorchamps 2009 1.01 by I.P.M
    • not enough garage spots
    MMG Spa 2007 1.0
    • cars spin out at the first turn every lap
    Xtremefactor 2007 NB/FS2010/FS2011
    • not enough pit boxes
    Xtremefactor 2007 sportcar pits
    • ai spin every time they cross the new start line
    Where do I find IPM 2011? I am just testing WCP 2015 and 2016 now.
     
    Last edited: Jul 29, 2017
  6. Dinos I

    Dinos I

    Messages:
    60
    Ratings:
    +24
  7. Mattie941

    Mattie941

    Messages:
    7
    Ratings:
    +0
    Unfortunately the 2010-11 IPM does not have enough garage spaces and for NFS Shift conversion the AI do not pull into pit boxes or abide pit lane speed limit

    I'm testing the track packs now
     
  8. Marco Dakic

    Marco Dakic

    Messages:
    9
    Ratings:
    +4
    Maybe you should work on the AIW File then