Kommandant R19M, 19x10 ET35 wheel made for the 911 GT3 and GT3-RS

[Isaac Chavira]

Featuring forged magnesium construction with a 7075T billet aluminum center lock nut; the wheel come in at 14.27lbs. And that is for the whole assembly too. This is an improvement on my past design posted here earlier.

"Kommand the road, Kommand the track, Kommand your destiny."

- Kommandant Wheels.


Mass properties of Assem2
Configuration: Default
Coordinate system: -- default --

Mass = 14.27 pounds

Total weld mass = 0.00 pounds

Volume = 245.13 cubic inches

Surface area = 1570.19 square inches

Center of mass: ( inches )
X = 0.00
Y = 0.00
Z = 1.60

Principal axes of inertia and principal moments of inertia: ( pounds * square inches )
Taken at the center of mass.
Ix = ( 1.00, 0.00, 0.00) Px = 463.55
Iy = ( 0.00, 1.00, 0.00) Py = 463.61
Iz = ( 0.00, 0.00, 1.00) Pz = 744.28

Moments of inertia: ( pounds * square inches )
Taken at the center of mass and aligned with the output coordinate system.
Lxx = 463.55 Lxy = 0.00 Lxz = 0.00
Lyx = 0.00 Lyy = 463.61 Lyz = 0.01
Lzx = 0.00 Lzy = 0.01 Lzz = 744.28

Moments of inertia: ( pounds * square inches )
Taken at the output coordinate system.
Ixx = 500.27 Ixy = 0.00 Ixz = 0.00
Iyx = 0.00 Iyy = 500.34 Iyz = 0.03
Izx = 0.00 Izy = 0.03 Izz = 744.28