Separate names with a comma.
Discussion in 'Sim Racing Hardware' started by Pete Mull, Aug 2, 2011.
Can anyone confirm what the pinouts are for these two pedal sets.
Just to confirm, are you requesting info regarding what each wire does in the connectors on both sets of pedals?
Are you after making some sort of adapter to wire the two together?
Found this after a quick search.
I know its a G25 to Fanatec convertion, but at least it has info on the G25 pedals, which cant be much different to G27?
That's just what I wanted, thank you very much.
I'm still looking for the pinouts for the xbox 360 pedals but look like I will have to strip them down and check the wiring unless someone can tell me how to check them with a multimeter.
It's easy enough to find out which is power, so connect power, usually +5V and then put a meter on the other pins one at a time and move an axis to see if it reads. For all wires connected to a common, look for a pin that will read as a short across more than 1 pin.
Thanks Jim, will give that a shot later today.