1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Dismiss Notice
Like RaceDepartment on Facebook.

Fanatec Csw - Custom Sequential Shifter?

Discussion in 'Sim Racing Hardware' started by Alex Ball, Dec 8, 2012.

  1. Alex Ball

    Alex Ball
    Web Nerd

    Hi guys,

    For the last however long I've had a BMW sequential shifter plugged into my SLI-Pro working fine. However, for some reason the SLI Pro gave up today (lights work, gears don't) so I'd like to make a plug so I can stick it directly into my CSW.

    Anyone know how to do so, what plug I need etc?

    Many thanks,
    Al
     
  2. hey Alex,

    you need a ps/2 cable. if you have any old mouses or they can be easliy bought from ebay or amazon.

    here's a thread that will show you the wiring. :) then all you need is use the same adapter the csw comes with which i assume will be the same as csr elite.

    http://insidesimracing.tv/forums/topic/5947-my-bmw-diy-sequential-shifter-with-sort-of-tutorial/

    certain ps/2 cables might not fit.snugly causing it not to work. to fix that i put in a few strands of electrical wire in to the ps/2 female cable and tape it to the adaptor.
     
  3. Alex Ball

    Alex Ball
    Web Nerd

    Perfect, exactly what I was after. Thanks again Nicholas!