• Racing is not a matter of life and death. It's much more important than that!
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. If you have any questions, please don't hesitate to ask. There's no such thing as a stupid question.

Advice needed, fitting real seats onto sim rig

Discussion in 'Sim Racing Hardware' started by Bez, Jun 27, 2015.

  1. Bez

    Bez
    All the gear, no idea...

    Messages:
    675
    Ratings:
    +161
    I'm considering replacing the seat on my GT omega evo with a sparco r333 but I'm wondering will I need to massively modify my rig and will I need the sparco mounting or are the holes on car seats universal, I'm not sure if the GT omega has different fixing points to regular car seats?

    If anyone has ever used a regular car seat on a rig (even better if it was a gt omega) hopefully you can help me out.
     
  2. Moxley6969

    Moxley6969

    Messages:
    498
    Ratings:
    +192
    Being a bottom mount you shouldn't need the side raisers as its not a side mount but rather bottom mount. So Im going to take a wild guess and say its a matter of getting a custom mounting plate made up. 99% sure it wont just bolt up.

    PS why the R333 ?
     
  3. Bez

    Bez
    All the gear, no idea...

    Messages:
    675
    Ratings:
    +161
    Seems decent quality, isn't too bucket'd which isn't needed in a static rig and looks like it'll look nice on my rig with the red font accent.