• Blurring the line between real and virtual motorsports
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

5th gear with H shifter

Discussion in 'GT Legends' started by Cote Dazur, Mar 10, 2014.

  1. I need help to get GT Legends to accept B17 for the 5th gear with H shifter. Same for the Reverse, with B19, it seems that GT Legend does not accept higher than B16 (4th gear).
    I could attribute an other button, like B3, to get the 5th gear to engage but it is not very immersive.
    How is it done?
    Last edited: Mar 10, 2014
  2. Rupe Wilson

    Rupe Wilson
    Senior HistorX club driver Staff Member Premium Member

    What shifter are you using,
    G25 shifter works ok, that's the only one i've used with the sim whether its connected to the wheel or with a Bodnar gable direct to the back of a pc with a usb.
    Last edited: Mar 10, 2014
  3. I use a Fanatec, I notice that your shifter is first B1 all the way to reverse B7.
    My Shifter works with all the other SIMs. from AC to Race 07 and (almost) all existing in between. ;)
    First is B14 all the way to B19.
  4. Rupe Wilson

    Rupe Wilson
    Senior HistorX club driver Staff Member Premium Member

    Maybe the sim is to old and cant recognise the input values from your shifter,
    sorry i cant help more:(
  5. yes, migth be, it seems to stop at B16, so either I only drive cars with 4 gears or I drive them in P&G3 and/or the other mod in Race 07.:)
    I am still hoping there is a way.
  6. What fanatec shifter are you using exactly?
    I have a CSR wheel+shifter and CSR Elite pedals. For GTL I ended up uninstalling the fanatec driver and using the logitech software with my wheel in G25/PS3/whatever mode. But I forget if a missing gear was also an issue at the time. I do remember that certain buttons I wanted to use were not available so changing the driver changed what buttons could be used in GTL even though I still cannot use them all.
  7. Hi,
    I have the same wheel and pedal set up to you. What reason did you change to the G25 drivers etc. Does it just run better, do the gears work better. Be glad of any advice you can give. I'm also not sure how to get the wheel in to PS3 mode.


  8. In case anyone still has this issue I thought I'd share a possible solution. There's a small program called Joy2key which will let you map joystick, controller and wheel buttons to something else, for instance a keystroke. So you could map the shifter buttons to for instance numpad 0-7.
    I used it to bind a button on my wheel to center head tracking while running GTL, but make sure to run Joy2key as admin else it won't work with GTL.
    You can also use Joy2key to get around the limit of max 3 USB devices in older sims.