G25 Shifter paddles fix/upgrade

After a long time my shifterpaddles were not really registrering every shift
It turned out to be the metal "spring" plate that hold the shifter paddles that get a bit tired, metal fatigue it's called.
The paddles do not come back so strong & tight anymore.
If you let go of the paddles to suddenly they bounce back a little even.
Giving you the double shift or no shift at all.

Here is the fix, or upgrade..
I put 2 little coilsprings in to push the paddles back.
The coilsprings i got from an old RC model i had lying around, but any good hardware store probably has some too..
Luckely they are yellow, so easy to see on the photos.

I drilled one hole where the spring must come out.
One smaller hole to secure the spring with a small screw.

The resistance is a bit higher, even feels better than when i just bought it.
Also releasing the paddles to sudden is no problem anymore.
Even if the flaps of your G25 / G27 still work i could recommend this little mod.
Feels much more real and sturdy.

veertje.jpg


veertjes2.jpg
 

Latest News

Online or Offline racing?

  • 100% online racing

    Votes: 99 7.9%
  • 75% online 25% offline

    Votes: 132 10.5%
  • 50% online 50% offline

    Votes: 177 14.1%
  • 25% online 75% offline

    Votes: 353 28.0%
  • 100% offline racing

    Votes: 493 39.2%
  • Something else, explain in comment

    Votes: 5 0.4%
Back
Top