PuRe IMO Tyres & Utilities (Powered by SimHub)
Please Rate & Donate if you like it here
Powered by the best Sim Racing Support Software on the planet, SimHub!!!
http://www.racedepartment.com/downloads/simhub-diy-sim-racing-dash.10252/
PuRe IMO Tyres - A camber and PSI suggest app that shows inner, middle and outer tyre and track temp live data and suggests psi and camber values based on that information.
The camber suggest works only when the tyre temps are up to working temp values (after approx 1 lap). It will then suggest whether more negative camber (-) or positive camber (+) should be applied to each wheel. All suggestions are based on your setup, how you drive, your inner, middle and outer tyre temps and the current track conditions, there are no fixed value suggestions for psi or camber
The Target Temp & Hot/Cold Ranges you set are memorized by the app per car.
How To Use IMO Tyres
1 Set the target temp on the app (optimal "hot" temp)
2 Set Hot/Cold Ranges
3 Drive for at least 1 lap to get feedback on camber and psi suggestions
(NB You must have pureaddictplugin enabled in SimHub settings for the app to work)
You can assign a button to GraphicalDashPlugin.NextScreen to access the temp tuner section or just use your mouse on the app to select the next page. It's possible via GraphicalDashPlugin.ActionA to change the pressure values from psi to bar to kPa, again this can be done with the mouse on the Action A app button. It's also possible to assign buttons to +/- Target Temp and +/- Hot/Cold Ranges
This app is tuned specifically for Assetto Corsa, it does work on RF, RF2 and AMS (that I've tested) but the tyre model is different in those games (those games will need a specific tuned version) . iRacing does not have any live tyre temp data while on the track & PCars2 is unsupported for now.
PuRe Timer - 8 char 7 seg LED dash
Displays speed(local), current gear, gear blink indicator (blink level editable on the app), lap, small & large fuel warnings, startline rpm ok, rpm max, current lap time, best lap time, last lap time, local time and pit limiter indicator (Font installation required (Supplied))
PuRe Delta - 4 char 7 seg LED dash
Displays delta to car in front, to car in rear, to session-best time and to best ever time (Font installation required (Supplied))
PuRe HW Monitor - A simple graphical representation of your hardware stats
Displays cpu/gpu temps and load, ram load, fps and simhub system usage (Additional Requirement: https://www.msi.com/page/afterburner)
PuRe iPad Button Box - A SimHub dash for iPad with assignable buttons and map that works on iPad through your local network
Assign any key you want to the buttons in Dash Studio, re-label them, re-assign them, its up to you
All the apps are transparent and resizeable to allow individual placement on your single/triple/quad screen setup (no individual screen required)
Please Rate & Donate if you like it here
Powered by the best Sim Racing Support Software on the planet, SimHub!!!
http://www.racedepartment.com/downloads/simhub-diy-sim-racing-dash.10252/
PuRe IMO Tyres - A camber and PSI suggest app that shows inner, middle and outer tyre and track temp live data and suggests psi and camber values based on that information.
The camber suggest works only when the tyre temps are up to working temp values (after approx 1 lap). It will then suggest whether more negative camber (-) or positive camber (+) should be applied to each wheel. All suggestions are based on your setup, how you drive, your inner, middle and outer tyre temps and the current track conditions, there are no fixed value suggestions for psi or camber
The Target Temp & Hot/Cold Ranges you set are memorized by the app per car.
How To Use IMO Tyres
1 Set the target temp on the app (optimal "hot" temp)
2 Set Hot/Cold Ranges
3 Drive for at least 1 lap to get feedback on camber and psi suggestions
(NB You must have pureaddictplugin enabled in SimHub settings for the app to work)
You can assign a button to GraphicalDashPlugin.NextScreen to access the temp tuner section or just use your mouse on the app to select the next page. It's possible via GraphicalDashPlugin.ActionA to change the pressure values from psi to bar to kPa, again this can be done with the mouse on the Action A app button. It's also possible to assign buttons to +/- Target Temp and +/- Hot/Cold Ranges
This app is tuned specifically for Assetto Corsa, it does work on RF, RF2 and AMS (that I've tested) but the tyre model is different in those games (those games will need a specific tuned version) . iRacing does not have any live tyre temp data while on the track & PCars2 is unsupported for now.
PuRe Timer - 8 char 7 seg LED dash
Displays speed(local), current gear, gear blink indicator (blink level editable on the app), lap, small & large fuel warnings, startline rpm ok, rpm max, current lap time, best lap time, last lap time, local time and pit limiter indicator (Font installation required (Supplied))
PuRe Delta - 4 char 7 seg LED dash
Displays delta to car in front, to car in rear, to session-best time and to best ever time (Font installation required (Supplied))
PuRe HW Monitor - A simple graphical representation of your hardware stats
Displays cpu/gpu temps and load, ram load, fps and simhub system usage (Additional Requirement: https://www.msi.com/page/afterburner)
PuRe iPad Button Box - A SimHub dash for iPad with assignable buttons and map that works on iPad through your local network
Assign any key you want to the buttons in Dash Studio, re-label them, re-assign them, its up to you
All the apps are transparent and resizeable to allow individual placement on your single/triple/quad screen setup (no individual screen required)
Thanks for the positive review ;)